Hot table model/temperature range: 1500/room temperature~1500 ℃ 1400/room temperature~1400 ℃

1200/room temperature~1200 ℃ T1000/room temperature~1000 ℃

800/room temperature~800 ℃ 600/room temperature~600 ℃

400/room temperature~400 ℃ 350/room temperature~350 ℃

Sample compartment/observation distance: * 7 * 3/6.5, * 7 * 5/8.5, * 8 * 2.5/6, * 10 * 2.5/6, * 8 * 4/7.5, * 10 * 4/7.5 (mm)

1. On site and public conditions

Indoor temperature: 15 ℃~30 ℃.

Extreme high temperature: 40 ℃

Extreme low temperature: -5 ℃

Relative humidity of the environment: ≤ 60%

High relative humidity: ≤ 65%

Workplace: Laboratory

2. Equipment composition

Use electric heating to raise the temperature, melt the sample, and observe its properties under a microscope.

3. Instrument requirements

The temperature can reach up to 1500 degrees, with adjustable heating and cooling rates, and can be cooled by circulating cold water or liquid nitrogen. The exterior of the hot table does not feel hot.

Temperature controller controls temperature, software sets temperature control range, temperature calibration range, heating and cooling range, etc.

The software display accuracy is 1 degree, the device stability and accuracy are 1 degree, and the transmission and reflection functions are universal. , temperature calibration can be performed in segments, supporting 15 segments

4. Detailed parameters

4.1 Sample chamber size: φ 7 × 4 (mm)

4.2 Observation hole diameter: φ 1.7 mm

4.3 Higher heating rate: 120 ℃/min (300 ℃ interval ≤ 40 ℃/min)

4.4 Electric heating material: Platinum

4.5 Observation window to sample observation distance: ≈ 6.8 mm

4.6 Cooling method; water cooling