Product Introduction:ZJ-35/50The specialized die-casting machine for ton vertical motor rotors is a small machine that can be used for die-castingYseries100/132The following motor rotors and special small motor rotors are the most ideal motor rotor die-casting equipment for various motor production units; It can also be used for other aluminum and zinc castings with die-casting center gates The machine structure consists of a machine base, a mold clamping part, an injection part, a hydraulic control part, and an electrical part The mold clamping part adopts hydraulic automatic locking, and its motion characteristics meet the requirements of the die-casting process, with smooth motion and reliable mold locking The injection system has high pressure and fast injection speed; And it has the characteristic of stepless speed regulation according to process requirements; Adopting a two-stage injection process, with a first stage slow and a second stage fast injection process, the highest fast injection speed can reach5rice/Seconds, its movements are reliable and sensitive The electrical part of the machine adopts low-voltage DC24VDirect point contact, simple structure, easy to repair The above system has the advantages of safety interlock devices, safety doors at the fast injection part of the host, safe, reliable, convenient, quality assurance, and long service life in the setting between work sequences This machineYB（E）-25The blade pump is used separately for fast injection of energy storage devicesYB（E）-50（63）Blade pump oil supply,Controlled by multiple directional switches for mold opening, closing, slow injection, slow injection return, cutting cylinder, and other operations accumulator pressure10MPa, byHY-Hb10Unloading overflow control Quick injection by24BYO-H20B-TElectro hydraulic directional control The maximum pressure of the nitrogen cylinder is maintained without oil pressure70-80MPaRecommend using products made in Shanghai46-68The anti friction hydraulic oil has a normal working oil temperature of50℃Left and right, generally not exceeding70℃The fuel tank must be cleaned thoroughly and filled with hydraulic oil85～90％(When the machine is working normally, it shall prevail).