One Z90 electric actuatorPRODUCT MODEL

Example:ZB30-18/40 rated torque 300N · m, output speed 18r/min, 40 revolutions per minute

ZB/ZC30-18/40,ZB/ZC45-18/40, ZB/ZC60-18/40, ZB/ZC90-18/40, ZB/ZC120-18/40,

two.Z90 electric actuatorDESCRIPTION

The ZB/ZC series valve electric device is a dual position valve electric drive device, suitable for valves with valve discs that move linearly, such as globe valves, gate valves, throttle valves, diaphragm valves, etc. After being combined with a secondary deceleration device, it can also be used for valves that rotate the valve disc, such as ball valves, butterfly valves, etc. The product has passed the type test and 10000 life test, and its performance indicators meet the requirements of JB/T8528-1997 standard.
The output torque ranges from 25N · m to 400N · m (divided into three machine base sizes), and there are eight output speeds to choose from: 12, 18, 24, 30, 36, 42, 48, and 60r/min. The manual speed ratio is 1:1. We can provide two connection sizes: torque type and thrust type, which comply with the JB2920 and ISO5210 standards respectively. The travel controller can be expanded to four positions (on, off, center 1, center 2). Valve position transmitter (4-20mA current output) is available as an accessory for selection.

three.Z90 electric actuatorWork environment and main technical data

1. Motor voltage: Typically 380V, 50Hz (special orders can be made between 380V and 660V, 50Hz, 60Hz)

Control voltage: Typically 220V, 50Hz, (60Hz is available for special orders)

2. Working environment:

2.1 Environmental temperature: -20~60 ℃

2.2 Relative humidity of the environment: ≤ 90% (at 25 ℃)

2.3 The working environment does not contain corrosive, flammable, or explosive media;

2.4 Protection level IP55 (special orders can reach IP68)

3. Short term work system, with a time quota of 10 minutes;

four.Z90 electric actuatorModel representation