Yunnan Amino Acid Liquid Fertilizer Production Line

After sales service commitment:

1. Factory inspection: Each product must be debugged and tested by professional quality inspectors before leaving the factory.

2. Debugging and installation: After the customer prepares the required materials and notifies our factory, we will respond within 24 hours. The debugging personnel will arrive at the location of the machine within 24 hours; If transportation is inconvenient or the journey is long, our factory personnel will arrive within 72 hours. And debug the product. After passing the debugging, the customer shall fill in their opinions and sign and stamp on the "Debugging Acceptance Report".

3. Operation training: Debugging personnel need to train the customer's operators until they can operate independently.

4. The machine comes with a one-year warranty, lifetime maintenance, and only the cost of repairing and replacing parts will be charged.

Yunnan Amino Acid Liquid Fertilizer Production LinePrinciple characteristics

A、 The liquid fertilizer filling production line has been improved and designed based on similar foreign products, and some practical additional functions have been added.

B、 The production line is simpler and more convenient in terms of operation, precision error, installation adjustment, equipment cleaning, maintenance, and other aspects.

C、 Compact and reasonable design, simple and beautiful appearance, easy to adjust filling volume.

D、 There are multiple filling heads in the production line, which are driven by cylinders and can fill materials more quickly.

E、 Using domestic and foreign pneumatic components and electronic control unit components, the performance is stable.

F、 The material contact parts are made of 304 stainless steel material.

G、 Convenient counting, no bottle filling, accurate filling volume, and counting function.

H、 Adopting anti drip and wire drawing filling plugs, anti high foam product filling lifting system, positioning system to ensure bottle mouth positioning, and liquid level control system.

Technical parameters of reaction kettle:

1. Design volume: 2m3, 3m3, 5m3, 10m3

2. Reaction temperature: room temperature~230 ℃

3. Mixing speed: 31~43r/min

4. Equipment Material: Stainless Steel

5. Mixing form: paddle type

6. Heating method: electric heating, steam heating

7. Thermal conductive medium: thermal oil, steam

8. Heat transfer structure: jacket type

9. The inner and outer surfaces of the whole machine are polished, which is beautiful and easy to clean

10. There is a liquid level display and control device

11. PH value detector can be installed as needed

Anhui Xinyuan has launched a complete set of production equipment for liquid fertilizers since 2013, including processes such as automatic metering and batching, mixing and blending, sedimentation and filtration, and quantitative filling. In 2014, Xinyuan launched an environmental protection project to turn waste into treasure, turning biogas slurry into fertilizer and solving the problem of biogas slurry pollution.

The microbial fermentation process is mainly divided into 5 steps. 1. Liquid storage: After pre-treatment, the biogas slurry is sent to the raw material tank, and after storage, it is sent to the fermentation tank; 2. Inoculate fermentation, the biogas slurry enters the fermentation tank, inoculates specific beneficial organisms, and is thoroughly stirred and mixed. After the liquid stays in the fermentation tank, it is sent to the ingredient tank; 3. Nutrient ingredients need to be added to the biogas slurry according to strict process procedures to ensure that the quality of fertilizers meets national standards; 4. Store the liquid, add nutrients to the liquid and send it to the finished product tank. After storage, send it to the packaging tank; 5. Packaging, automatic filling of finished liquid fertilizers.