Name: YCR-205B Fluorescence Dissolved Oxygen Analyzer
Brand: Analytical Technology (Shenzhen) Co., Ltd
Availability: InStock

4th Floor, Building C, Weijian Technology Industrial Park, Beihuan Road, Shiyan Street, Bao'an District, Shenzhen

Instrument Introduction

YCR-205B fluorescence method dissolved oxygen analyzer is a commonly used instrument and equipment, mainly used to determine dissolved oxygen in water, widely used in industry, agriculture, scientific research, environmental protection and other fields. The fluorescence method dissolved oxygen measuring instrument adopts advanced fluorescence method to replace traditional membrane electrodes, without replacing the membrane and filling the electrolyte, reducing maintenance workload and improving work reliability, especially suitable for harsh working conditions in the field of sewage treatment. In addition, fluorescence sensors do not consume oxygen, so there are no requirements for flow rate and agitation, and they are not affected by substances such as sulfides.

Detection Principle

The fluorescence method dissolved oxygen analyzer is based on the quenching principle of specific substances' active fluorescence in physics. The modulated green light is irradiated onto the fluorescent substance to excite it and emit red light. Due to the quenching effect, oxygen ions can carry away energy, so the time and intensity of exciting red light are inversely proportional to the concentration of oxygen molecules. We used a red light source synchronized with green light as a reference, measured the phase difference between the excitation light and the reference light, and compared it with the internal calibration value to calculate the concentration of oxygen molecules. After temperature compensation, we output the final value.

Performance characteristics

*LCD display in both Chinese and English, fluorescence quenching principle, simple operation
*No oxygen consumption, no requirements for flow rate and agitation
*Not affected by chemical substances such as sulfides, stable and accurate
*No need to replace the membrane or fill the electrolyte, with minimal maintenance and improved efficiency
*Zero point and air value two-point calibration, simple and fast
*Output function of up and down line alarm relay

Technical Parameter

Measurement principle: Fluorescence quenching method	Power supply:AC220V/DC24V(Optional)
Measurement range:0-20mg/L	Analog output:4-20mALoad<750Ω (dual optional)
Accuracy:±0.02mg/L	Relay output:2Road alarm relay output
resolving power:0.01 mg/L	Digital signal:RS485Module（MODBUSagreement)optional
treetop Fixed: Factory calibration, can be compared and verified on site	Protection level:IP65(transmitter)IP68(Sensor)
apparent Show:LCDLCD display, multi parameter display on the same screen	Working temperature: transmitter-20-60℃，
Working temperature: sensor0-60℃ (automatic temperature compensation)0-99℃）	Power frequency: （50±0.5）Hz
Repeatability: ±0.3mg/L accuracy:0.02 mg/L	Environmental humidity: Relative humidity ≤85%
Sensor cable:10Meter (other lengths can be customized)	Resistance Pressure:<0.6MPa
Installation methods: bracket immersion type, pipe insertion type	Installation size:3/4NPT

Purchase Guide

controller:

Wall mounted exterior dimensions: 242 * 184 * 135mm (length * width * height)
Disk mounted external dimensions: 96 * 96 * 110mm (opening size 91 * 91)
Sensor:
YD0100： Constant oxygen immersion sensor, 10 meter cable (customizable)
Optional accessories:
ZJP00/01 electrode PVC immersion mounting bracket/stainless steel anti friction mounting bracket
YBX02/03 Control Instrument Box Stainless Steel/Electrostatic Spray Paint

National Unified Service Hotline: 400-6868-053