Name: Xinyu single-phase multifunctional power instrument transformer meter combination
Brand: Yanggu Xinyu Electronic Technology Co., Ltd
Availability: InStock

Xinyu Electronic Technology Co., Ltd., Shizilou North Road, Shizilou Street, Yanggu County, Shandong Province

Single phase multifunctionalPower meter+open type transformer 50A/75mv

XY194E-9SY1 LCD single-phase multifunctional electric meter measures all single-phase electrical parameters

(current, voltage, active power, reactive power, power factor, frequency), including

Electric energy, reactive energy, etc.

Standard RS485 interface, international standard Modbus rtu protocol, providing upper control

Machine testing software, providing engineering example programs for Kingview software.

Optional 2-channel relay output, can be set as electrical parameter alarm or remote control output.

Optional 1 analog signal (DC0-20mA, DC4-20mA, DC0-5V)

The output can be set to be associated with any electrical parameter in the single-phase electrical parameters.

Technical parameters:

External dimensions:

This instrument has four different shapes:

Panel size: 72X72mm, hole size: 68X68mm, depth: 90mm

Panel size: 80X80mm, hole size: 76X76mm, depth: 90mm

Panel size: 96X96mm, opening size: 91X91mm, depth: 80mm

Panel size: 120X120mm, opening size: 111X111mm, depth: 80mm

RS485 communication module:

RS458 supports standard Modbus rtu protocol commands: 03H, 04H, 10H. Baud rate: 240048009600. Data format: 8-bit data bits, no checksum, 1-bit stop bit; 8-bit data bit, odd parity, 1-bit stop bit; 8-bit data bit, even check, 1-bit stop bit; 8 data bits, no checksum, 2 stop bits. The communication address, baud rate, and data format can be set through the instrument menu. All measured electrical parameters and parameter settings can be read out through the RS485 interface and can be connected to various PLCs, HMI， Configure software networking.

Relay output module:

Up to 2 relays can be selected, which can operate in alarm or remote control mode. When working in an alarm state, the relay is associated with one of the measured electrical parameters, and if it is lower or higher than the set alarm value, the relay will act; When working in remote control mode, the action of the 10H control relay is controlled by Modbus rtu commands through the RS485 interface.

Transmission output module:

Up to one analog transmission output function is provided, and each channel can select any one of the six electrical parameters as the transmission output item. Through the instrument's own transmission output function, the analog transmission output function of electrical parameters (0-20mA, 4-20mA, 0-10-20mA, or 4-12-20mA) can be achieved, and the corresponding relationship between the quantities can be set arbitrarily.

Wiring diagram:

Upper computer demonstration software interface:

Configuration King Example Engineering Software Interface:

Real time baby display: