characteristic:
·This instrument has the function of compensating for changes in fluid temperature and pressure. When measuring flow rate, if the temperature and pressure of the measured fluid deviate from the design values, it will cause certain errors in the measurement results of volume flow rate and mass flow rate. This instrument has the function of compensating for the temperature and pressure of general gases, superheated steam, and saturated steam. The instrument has three inputs: flow rate, pressure, and temperature, which can eliminate the adverse effects of temperature and pressure changes on the flow measurement results
·The error is less than 0.2% F · S, and it has calibration and digital filtering functions, which can help reduce the errors of sensors and transmitters and effectively improve the measurement and control accuracy of the system
·Temperature, pressure, uncompensated instantaneous flow rate, and compensated instantaneous flow rate can be alerted with upper or lower limits through parameter selection. Independent setting of alarm sensitivity
·1-channel transmission output. Output temperature, pressure, uncompensated instantaneous flow or compensated instantaneous flow can be selected through parameters
·A fully transparent, high-speed, and efficient networked communication interface enables complete data transmission and control between computers and instruments. The unique control transfer function allows the computer to directly control the alarm output and transmission output of the instrument. The time to read measurement data is less than 10ms. Provide technical support for testing software, configuration software, and application software
·Equipped with a printing interface and printing unit with hardware clock, it can achieve manual, timed, and alarm printing functions. If an intelligent printing unit is selected, multiple instruments can share one printer
·The power outage recording function can record the total power outage time, number of power outages, and real-time time of the last 8 power outages and power ups, which can be accessed and viewed through the panel
Selection Table