VIP member
Wood sawdust moisture analyzer
Product Details Product Overview: The sawdust moisture analyzer can be widely used in all industries that require rapid moisture measurement. This pro
Product details
Product details
Product Overview
Wood sawdust moisture analyzerThis product can be widely used in all industries that require rapid determination of moisture content. It can be used to test the moisture content in products such as sawdust and wood powder.Vicometo brandThe moisture analyzer uses a halogen lamp as the heating source, commonly known as a wood moisture analyzer or a halogen lamp moisture analyzer. The working principle of the Vicometo halogen moisture analyzer is to inject halogen gases such as iodine or bromine into the bulb. Under high temperature, the sublimated tungsten wire undergoes chemical reaction with the halogen, and the sublimated tungsten will re solidify on the tungsten wire, forming a balanced cycle to avoid premature breakage of the tungsten wire. Therefore, halogen bulbs have a longer lifespan than incandescent bulbs. Meanwhile, due to the ability of the filament to operate at higher temperatures, higher brightness, color temperature, and luminous efficiency are achieved.
Vicometo brandVM series wood moisture analyzerThe difference between other products is that traditional moisture determination generally uses oven drying method, which takes two to three or even three to four hours to test a sample, and also requires weighing with a balance and manual calculation to obtain the moisture value (moisture content) of the sample. The low efficiency of traditional oven method for moisture determination cannot meet the fast-paced production needs of enterprises.
Weike MeituoVM series wood moisture analyzerUsing an efficient drying heater - a high-quality ring halogen lamp, the sample is rapidly and uniformly heated, and the moisture content of the sample is continuously dried. Throughout the measurement process, the rapid moisture analyzer automatically displays the measurement results in real-time, including sample weight, moisture content, solid content, measurement time, heating temperature, etc.
Vicometo brandThe VM series wood moisture analyzer applies the principle of international oven drying method, and the measurement results have good consistency with the oven method moisture measurement, but the work efficiency is much higher than that of the oven method moisture measurement. Using the VM series rapid moisture analyzer, it usually takes only a few minutes to measure the sample, which has been favored and praised by enterprise users.
Product Operation
Operation video:
(The video is currently being edited and produced)
Operation steps:
① Place the samples to be tested evenly into the sample tray
② Cover the heating cover
③ Finally, press the 'Start' button to proceed
The remaining work is automatically completed by the instrument. After the measurement is completed, the instrument will automatically sound an alarm, and the measurement result will be locked on the LCD display screen.
Product Features
1. No installation or debugging required, can be used after unpacking;
2. No need for training, simple operation, saving tedious usage steps;
3. Short measurement time and high work efficiency;
4. Uniform heating, stable performance, and accurate testing;
5. Small size and light weight;
6. Fully automatic measurement, alarm reminder after measurement completion, no need to supervise the measurement process;
7. Widely used and almost applicable for moisture determination in various industries;
8. High precision and high sensitivity gold-plated ceramic sensors make the instrument testing effect more outstanding and accurate;
9. The unique windproof cover design makes the instrument weighing system more stable;
10. The moisture and solid content of the sample can be converted simultaneously;
11. The heating chamber adopts a pure stainless steel chamber cover, which is heat-resistant and easy to clean.
Detailed specifications
|
Model:
|
VM-5S
|
VM-1S | VM-01S | VM-01ZS |
|
称重精度：
|
0.005g
|
0.001g | 0.0001g | |
|
Readability of weighing:
|
120g
|
100g | ||
|
Moisture analysis accuracy:
|
0.01%
|
0.001% | ||
|
Operating temperature range:
|
The optimal temperature range is 13-25 ℃
|
|||
|
Calibration method:
|
External calibration weights, temperature calibration
|
|||
|
Weighing tray size:
|
Diameter 90mm
|
|||
|
Power on preheating:
|
20-30 minutes
|
|||
|
Baud rate:
|
300, 600, 1200, 2400, 4800, 9600
|
|||
|
monitor:
|
LCD display（Optional 5.0-inch color intelligent touch screen)
|
|||
|
Temperature sensor:
|
High precision PT100 platinum thermistor
|
|||
|
Using power supply:
|
Voltage 220V ± 10%, frequency 50HZ ± 1HZ (export products can be customized)
|
|||
|
Heating temperature range:
|
60-200℃
|
|||
|
Drying Procedure:
|
Standard heating, step heating, and weight loss heating modes
|
|||
|
Humidity display mode:
|
relative humidity
|
|||
|
Shutdown mode:
|
Automatic shutdown, manual shutdown, timed shutdown
|
|||
|
Time setting:
|
0-99 minutes with a 1-minute interval
|
|||
|
External dimensions:
|
310mm×205mm×200mm
|
|||
|
Net weight:
|
5.0 kg
|
|||
Application field
Vicometo brandThe VM series wood moisture analyzer is applied to all industries that require rapid moisture measurement. It can measure any particle, powder, sheet, or non-volatile liquid, such as the pharmaceutical industry, chemical industry, electronics and semiconductor industry, plastic raw materials, rubber, tobacco, tea leaves, food, starch, feed, coal, molding sand, sewage sludge, dairy industry, and so on. Weike MeituoVM series wood moisture analyzerIt is the best choice for moisture measurement instruments in the production process of enterprises and laboratories!
Precautions
1. The wood moisture analyzer is used to measure the moisture content in samples, and any other use may cause harm to individuals and damage to the instrument.2. Please read the instructions carefully before use and do not use in environments that do not meet the requirements.
3. Adequate space should be ensured around the instrument to prevent heat accumulation and overheating.
4. Do not place flammable materials around the instrument as the area around the heating unit may become hot.
5. After the test is completed, due to the fact that the sample itself, heating unit, and its container will still be very hot, caution should be taken when removing the sample.
6. During the heating and drying process, the temperature of the ring-shaped heating components will reach 400 ℃. Therefore, do not open or touch the heating unit. If you need to turn it on, please disconnect the power and wait until it completely cools down.
7. For matrices containing toxic elements, they can only be heated and dried under well ventilated conditions.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-