VIP member
Water quality hardness online measuring instrument
Brief description: The Aqualysis800 online water hardness measuring instrument is easy to operate and has high measurement accuracy. It can also be pa
Product details
Water quality hardness online measuring instrument
Aqualysis800 online water hardness monitorWidely used for monitoring the alkalinity of water quality in boiler water, softener effluent, cooling circulating water, surface water, pharmaceutical injection water, etc;
Why chooseWater quality hardness online measuring instrumentAqualysis800？
Aqualysis 800Application of titration colorimetric principle for online monitoring of water hardness Quality control of water softening process, compact structure, simple operation, and extremely high precision High, low reagent consumption, low maintenance cost, and can operate continuously for a long time.
Easy to install and simple to operate
Automatic calibration, automatic diagnosis, and monitoring
,Super Gcost performanceHigh measurement accuracy
Low maintenance and reagent consumption
Compact design, 400x300x180mm/4Kg
LCD color screen display in both Chinese and English
Continuous measurement or interval measurement (1-360min)
, 4-channel programmable contact output
, 2-channel programmable digital input (can be linked with external devices)
Data storage, fault recording, RS485, 4-20 mA output
AQUALYSIS 800 Product Parameters:
type number |
AQUALYSIS 800 |
measurement method |
Titration colorimetric method |
measure time |
2-8Minutes, depending on the hardness of the water |
precision |
± 2% of the upper limit of the selected reagent |
repetitiveness |
± 2% of the upper limit of the selected reagent |
electricity source |
85-265VAC,47-63Hz,power waste:25VA（During runtime,3.5VA（During standby mode |
Protection level |
IP65 |
ruler inch |
400 x300x180mm(WxHxD) |
apparent show |
LCDcolor screen display |
selectable unit |
°dH、°f、ppmCaCO3Themmol/l |
lose go out |
1、4Programmable relay output（max250V,4A） 2、1road4-20mAsignal,max750 Q 3、1roadRS485output |
lose enter |
1TheIN1Input (start analysis)2TheIN2Input (Stop Analysis) |
analysis cycle |
Time interval measurement（1~360min）/external signal/Traffic signal |
Rinse time |
Can be set（15-1800S） |
water quality requirements |
pH：4-10;Iron:<3ppm;Copper:<0.2ppm ;Aluminum:<0.1ppm;Liu:<0.2ppm |
Wen degree |
environment10°C - 40°C Water sample:5°C-40°C |
pressure |
Ca. 0.2-5 bar (max) (Recommendation 1)one2bar) |
Installation method |
wall-mounted |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-