Equipment Overview:

A vacuum degassing tank (vacuum degassing unit) is a device that uses vacuum suction to remove non condensable gases from liquid materials. It is an essential equipment for degassing dairy products, fruit juice and other materials on production lines. The use of a vacuum degassing tank (vacuum degassing unit) can effectively remove air (oxygen) from the material liquid, inhibit browning, oxidation of pigments, vitamins, fragrance components, and other substances, prevent quality degradation, remove suspended particulate gas attached to the material liquid, inhibit particulate flotation, maintain good appearance, prevent foaming during canning and high-temperature sterilization, and reduce corrosion of the container wall. This device is widely used in industries such as dairy products, fruit juice beverages, daily chemical products, and biopharmaceuticals.

Structural composition:

The Hefei Xiaoniu vacuum degassing unit mainly consists of a vacuum degassing tank, a vacuum pump, a discharge pump, an equipment platform, an electric control box, and pipe fittings and valves. The vacuum degassing tank is made of sanitary grade high-quality 304 stainless steel material, with fine polishing inside and outside, meeting the requirements of food and drug grade. It is equipped with a special liquid distributor and automatic liquid level control device, as well as observation glassesCIPCleaning balls, etc; Energy saving vacuum pump with stable performance and low noise; The discharge pump adopts sanitary centrifugal pump, screw pump or rotary pump; Integrated stainless steel platform, compact structure, easy to move the whole machine; Control of pumps and liquid level height in stainless steel electrical control cabinets; Stainless steel mirror tube, sanitary valve accessories, clean and hygienic instruments, reliable quality.

Working Principle:

When using a vacuum degassing unit, turn on the matching vacuum pump to pump out the air inside the vacuum degassing tank. The material enters the tank through the feeding port due to vacuum pressure. When the material rises to a certain height, the control valve automatically controls the feeding. At this time, the feeding speed can be observed and controlled from the sight hole. When the vacuum degree in the tank reaches the process requirements, the material can be pumped out from the material outlet. As long as the vacuum degree and the balance of inlet and outlet are maintained, production can continue.

Equipment model and specifications:

Note: The parameters in this table are for reference only. Please refer to the final product.