VK1611 Small CNC Longmen Milling Machine/Machining Center Details

2、 Main structural features:

1. The gantry structure is a closed door structure, while the bed structure is a "C" - shaped open structure. As the name suggests, a closed structure is definitely more stable than an open structure. It is made of high-strength HT300 high-quality cast iron and designed with reasonable structure after aging treatment. It has good casting and processing technology, high rigidity, good flexibility resistance, and excellent precision stability.

2. Ultra short throat depth, the gantry structure solves the weakest link of the bed structure - throat depth problem. The throat depth of the lightweight gantry is 50% shorter than that of the bed structure, and its machine tool rigidity can be increased by 2 times.

3. The weakest part of the sliding pillow in the gantry structure has been extensively verified through use, and a set of wire rails has been added to it, greatly enhancing the rigidity of the four wire rail structure, basically overcoming the problem of insufficient rigidity of the sliding pillow, and doubling the rigidity of the whole machine compared to the bed type machining center.

4. Adopting well-known Taiwanese brand high-speed, high-precision, and high rigidity spindle units, with strong axial and radial bearing capacity and a speed of up to 8000rpm;

5. The spindle adopts a central blowing structure, which quickly cleans the inner cone of the spindle with central high-pressure gas after loosening the tool, ensuring the accuracy of tool clamping;

6. The X, Y, and Z direction guide rails and lead screws are all enclosed and protected to ensure the cleanliness of the lead screws and guide rails, and to ensure the transmission and motion accuracy of the machine tool;

7. The external protection of the machine tool adopts a fully enclosed structure design, which is safe and reliable;

8. Adopting centralized automatic lubrication device, timed and quantitative automatic intermittent lubrication, stable and reliable operation;

9. Z: A workbench with a length to width ratio of 1.5 is more suitable for processing molds and mold frames.

10. Standard configuration of CNC control system: Kain Di 1000cc optional; The (Mitsubishi, Fanuc, Siemens, new generation) system has complete and reliable interlocking, safety protection, and fault diagnosis alarm functions, equipped with RS232 standard communication interface, and can achieve DNC processing

VK1611 Small CNC Longmen Milling Machine/Machining Center Parameters

VK1611 Small CNC Longmen Milling Machine/Machining Center Configuration

XY;RGH45HA

Y;RGH55HA