Jiangsu Oubai Automation Instrument Co., Ltd
Home>Products>Universal passive isolator
Firm Information
  • Transaction Level
    VIP member
  • Contact
  • Phone
    13813330667,15250863077
  • Address
    No. 68 Jianshe Road, Minqiao Industrial Concentration Zone, Jinhu County, Jiangsu Province
Contact Now
Universal passive isolator
Input 4-20mA current signal and output isolated current or voltage signal to achieve mutual isolation between input and output. This product has fast
Product details

Input 4-20mA current signal and output isolated current or voltage signal to achieve mutual isolation between input and output. This product has fast response, low power consumption, and good temperature characteristics. It can be used in conjunction with various instruments, DCS, PLC and other equipment, and has a wide range of applications in major projects in industries such as petroleum, petrochemical, manufacturing, power, metallurgy, etc.

What is a passive isolator?

Adopting a "passive" working mode, which means no external power supply is required and no independent power interface terminals are set up. The so-called "passive" working mode refers to the voltage consumed by the circuit being provided by the signal input terminal (circuit) or output terminal (circuit), that is, the circuit is powered by the input terminal (circuit) or output terminal (circuit),Implement signal isolation and conversion. Therefore, passive isolators can be further divided intoInput end circuit power supply isolatorandOutput end circuit power supply isolator.

Input end circuit power supply isolator:

The input and output signals are both DC current signals, without the need for an external power supply. The power energy is obtained from the input signal terminal to achieve signal isolation and conversion. The circuit can achieve one input, one output (one in, one out), and two inputs and two outputs (two in, two out).


  • Output end circuit power supply isolator:

    The input signal is a DC current or voltage signal, which does not require an external power supply. The power energy is obtained from the output signal terminal, and the output signal is a 4-20mA two-wire current, which can be output to DCS or PLC equipment,The load powered by the circuit can bePLCDCSWaiting for cards with voltage output,The circuit can achieve one in one out and two in two out.

  • Rail installation, low power consumption, suitable for dense installation
    Isolation between input, output, and power supply
    Intelligent design, digital calibration, potentiometer free, automatic zero point calibration.
Input signal Current: 4-20mADC
output signal Current output: 4-20mADC
Technical specifications for universal passive isolators
measurement accuracy ± 0.2% x FS, ± 0.1% x FS
Temperature drift <50ppm/℃
OUTPUT RIPPLE ≤1mV
response time ≤0.2ms
stability time ≤2ms
signal frequency range 0Hz~300Hz
Load capacity RL<[(U-3)/0.02]; U is the supply voltage for the circuit
dielectric strength ≥ 1500VAC (leakage current 1mA between input/output)
insulation resistance ≥ 100M Ω (between input/output)
electromagnetic compatibility EMC complies with IEC6100-4
Allowable ambient temperature for continuous operation -20~+60℃
power supply Two line power supply voltage
Installation form 35mm rail installation

Online inquiry
  • Contacts
  • Company
  • Telephone
  • Email
  • WeChat
  • Verification Code
  • Message Content

Successful operation!

Successful operation!

Successful operation!