• Power supply voltage:8-32VDC

• Output current: dip switch setting,16Selection, maximum2.2A(Peak value)

• Current control:PICurrent control algorithm, high-speed high torque output, low vibration, low noise, low heat generation

• Subdivision settings: DIP switch settings,16Options

• Speed range: Choose a suitable stepper motor, up to a maximum of3000rpm

• Resonance suppression: Automatically calculate resonance points to suppress mid frequency vibrations

System self-test: The driver automatically detects motor parameters during power on initialization and optimizes the motor current algorithm and anti resonance electronic damping coefficient based on this

• Control mode: Pulse&Direction mode (default)

Dual pulse, controlled self operation, continuous self operation, built-in jumper optional

• Digital input filtering:400KHZ(Default)/100KHZBuilt in jumper optional

Built in jumper3select

Idle current: When the motor stops running at half current0.2After seconds, the idle current will automatically decrease to the operating current50%

• Spontaneous pulse: built-in jumper selection

Built in oscillator, jumper or switch signal control motor start stop,16 The gear speed can be switched automatically, and an external potentiometer or voltage speed control can be used

1. Electrical specifications

2. Mechanical dimensions

3 Motor wiring