Device dimensions

Size of each test box: 500 * 500 * 500mm (length * width * height), (three-layer structure)

Outer box size: 710 * 780 * 2060mm (W * D * H)

Equipment material

Outer box: 1.5mm thick cold-rolled sheet and treated with high-temperature double-sided baking paint,

Inner box: SUS # 304 stainless steel, thickness 1.0mm thick;

Box load-bearing capacity

The load-bearing capacity of the bottom layer shall not be less than 150kg, and the load-bearing capacity of the second/third layer shall not be less than 50kg

Equipment box door

Single door, double layered door, inner box door made of stainless steel material and reinforced with silicone strips, with a visible observation window on the front

observation window

Double layered tempered glass with a thickness of 10mm.

Box protection

The entire interior of the test box is covered with PTFE tape, which can effectively prevent corrosion, insulation, flame retardancy, and is easy to clean

Installation port

Each layer of the box has one circular cable installation port on each side

exhaust

Each layer of the box is equipped with an exhaust fan and a ventilation duct (diameter 100mm) on the back, which can be externally connected to a strong laboratory exhaust fan

lighting

Each layer of the box is equipped with lighting devices for easy observation of the sample

Thermal insulation protection

There is insulation design between each layer to avoid mutual interference during testing

weight

About 200kg

power supply

1∮，220VAC±10%，50Hz,