Product Introduction of Tailless Fully Hydraulic Excavator

Equipped with original imported Kubota engines that comply with National III emissions standards.

The hydraulic system is all imported with original packaging and adopts load sensitive technology, which has good operational performance and efficiency.

Adopting a tailless small turning structure, the rear of the vehicle will not exceed the track in any state, and the boom has a deflection function, ensuring flexible operation in narrow areas.

The chassis is a retractable structure with good passability.

Technical parameters of tailless fully hydraulic excavator

The total weight of the machine is 1800KG

Bucket capacity 0.05m3

Maximum excavation force of 15.2KN

Rotation speed 9.5rpm

Walking speed 21/42 Km/h

Ground voltage ratio 29.6KPa

Fuel tank capacity 22L

Rated power of engine 14.2KW

Engine type: water-cooled three cylinder diesel engine

Hydraulic system

Maximum flow rate 29.6L/min

Rated working pressure 20.5MPa

Type: Fully hydraulic pilot control, load sensitive system

Scope of work

Maximum excavation height 3556mm

Maximum unloading height 2452mm

Maximum excavation depth 2247mm

Maximum excavation range 4045mm

The maximum excavation range on the ground is 3784mm

Minimum turning radius of tail 650mm

The turning radius of the working device is 1780mm

Arm deflection left 45 degrees/right 55 degrees

Physical picture of tailless fully hydraulic excavator product