TT10K torque telemetry system

characteristic

lEasy installation: Suitable for shafts of any size, without the need to disassemble or modify the mechanical structure.

lGain adjustable: There is no limit to the torque range, and users can choose the appropriate gain to adjust the torque/Voltage signal output ratio.

lReliable data transmission: wireless digital transmission, reliable signal, low noise.

lEasy to operate: The handheld remote control can be used to select channels and gain the transmitter/Control the range, calibration, battery waiting mode settings, etc. without having to remove the transmitter.

Parameters

TX10K-S transmitter

lSensor: Full bridge strain gauge (standard:350 euros)

lBridge pressure incentive:2.5 VDC

lPower input:7.5~18 VDC， The maximum current at 350 ohms bridge is 50mA

lgain/Range: Gain range of 500-16000, with a total of 6 levels, corresponding to ranges of+/-4000,+/-2000,+/-1000,+/-500,+/-250,+/-125 microstrain.

lBattery life:24 hours (9V lithium battery, 350 ohms bridge circuit, 25 ℃ ambient temperature)

lLaunch distance:20 feet, about 6 meters; Transmission frequency: 902~925 MHz

lVolume and weight:25mm×41mm×64mm，85g

lCentrifugal acceleration:3000g (steady state, e.g. 6500RPM, shaft diameter 5 inches)

lWorking temperature:-30~85℃

RX10K receiver

lFull range output:± 10VDC, adjustable on site.

lPower Supply:12VDC， Maximum 300mA

lVolume and weight:73mm×146mm×216mm，1kg

lSignal output mode: analog voltage andRS-232 port

lWorking temperature:-20~70℃

RM10K remote control

lFunction: Channel selection, gain/Range setting, shun calibration, battery standby state setting.

lRemote control distance:10 feet, about 3 meters

TT10K system

lresolving power:14 bit ADC

lFrequency response:0~500Hz（-3dB）

lMultiple systems:16 systems can work simultaneously