Tension measurement is mainly divided into online tension measuring instruments and tension sensors, which measure the tension of moving yarns, metal wires, or coils online. The tension control system is composed of a constant tension automatic controller, magnetic powder brake, and magnetic powder clutch to achieve tension control. The tension measurement starts with the switching device of the tension system, which converts tension into pressure. Through strain gauges, the sensor body is sensed by the force deformation caused by the measured object, and the change in force is reflected in the transmission circuit, forming an electrical signal output proportional to the change in tension. The strain gauge body=force transmission+elastic body strain+strain testing circuit. Considering rolling friction, the true tension needs to be corrected by a coefficient. Structurally, it is divided into three types: axial platform, through axis, and cantilever, all of which have the ability to resist lateral swing.

Its significant feature is to solve the problem of the inability to adapt the tension force of the coil during the start-up process and load changes, and to control the coil tension adjustment device to achieve automatic adjustment of the coil tension, so that the conveying equipment is always in the most ideal state. Reduce the occurrence of insufficient tension, which causes the raw materials to drift during operation and wrinkles the finished product; Excessive tension can easily cause the raw materials to break, resulting in an increase in the number of broken ends in the finished product.

·Used to measure the tension of materials such as fibers, wires, cables, bandages, etc.

·Continuous online measurement of tension without changing the direction of the wire or belt.

·High speed bearing wheel, surface polished, low friction, accurate tension measurement

·There are two types of clamping slots, V-shaped and U-shaped, which effectively control the left and right swing of the cable strip

·Hardened steel Hardened aluminum Ceramics There are four types of black plastic wheel materials available for practical selection

·Reduce fiber optic cables Bending of fiber sensitive materials, equipped with a dedicated testing wheel

·The maximum linear speed is<1000m/min

·Equipped with tension sensor, tension signal amplifier, and fully automatic tension controller

·Object: Optical fiber, yarn, synthetic fiber, food film, metal wire, wire and cable, tape, steel strip, etc.

·Easy installation, mechanical overload protection, and safe use.