VIP member
TG-5 CNC Five Axis Tool Grinding Machine
TG-5 CNC Five Axis Tool Grinding Machine
Product details
TG-5 mechanical specifications
| Axial travel and accuracy | |
|---|---|
| x-axis | 370 mm |
| y-axis | 240mm |
| Z-axis | 190 mm |
| A-axis rotation angle | 360° |
| C-axis rotation angle | -16° -196° |
| Fast moving speed | |
| Fast movement speed of X/Y/Z axis | 6 m/min |
| A-axis rapid movement speed | 100 rpm |
| C-axis rapid movement speed | 15 rpm |
| resolution | |
| Linear axis resolution | 0.001 mm |
| Rotation axis resolution | 0.001° |
| Grinding range | |
| workpiece diameter | 3-20 mm |
| Maximum rotation diameter of workpiece | 90 mm |
| maximum length of workpiece | 150 mm |
| Maximum blade length of workpiece | 100 mm |
| main shaft | |
| Grinding wheel set | Max 2 x Ø 150 mm (6 ") - optional |
| Grinding wheel spindle type | BBT30 Belt Spindle/HSK-50C Concealed Spindle - Optional |
| Grinding wheel spindle power | BBT30 7.5 kW/HSK-50C 5.5 kW - optional |
| Grinding wheel spindle speed | 9000 rpm |
| controller | |
| controller | NUM Flexium+ 68 |
| Mechanical specifications | |
| Electricity 3 x 380V | Approximately 35 kVA |
| Mechanical weight | 4530 kg/5200 kg (optional robotic arm&automatic wheel exchange system) |
| Floor area (length x width x height) | 3615 x 3812 x 2605 mm/3615 x 4326 x 2605 mm (optional robotic arm) |
| Air pressure | Min. 5 kgf/cm² |
| Rated flow rate of cutting oil | Min. 150 L/min |
Standard accessories
Tube clamp seat - NANN system (Taiwan made):
SPC8 (suitable for clamp Ø 3- Ø 8 mm)
SPC8 (suitable for clamp Ø 3- Ø 8 mm)
Tube clamp NANN system (Taiwan made):
Ø6 mm
Ø6 mm
Tool&Grinding Wheel Automatic Detection System -3D Probe
Grinding wheel flange
Tool&Grinding Wheel Automatic Detection System -3D Probe
Grinding wheel flange
Central control automatic lubrication device
Fully enclosed protective cover
Basic cushion block and horizontal adjustment screw
light
Standard tools and toolboxes
Select accessories
A-axis upgraded direct drive motor (including cooling system)
Tube clamp seat - NANN system (Taiwan made):
SPC16 (suitable for clamp Ø 9- Ø 16 mm)
SPC25 (suitable for clamp Ø 20, Ø 25 mm)
SPC16 (suitable for clamp Ø 9- Ø 16 mm)
SPC25 (suitable for clamp Ø 20, Ø 25 mm)
Tube clamp NANN system (Taiwan made):
Ø3, Ø4, Ø8, Ø10, Ø12, Ø16,Ø20 mm
Ø3, Ø4, Ø8, Ø10, Ø12, Ø16,Ø20 mm
HSK-50C concealed spindle
Automatic exchange system for grinding wheels - two sets (including HSK-50E concealed spindle)
Automatic loading and unloading system
Mechanical hand soft claw: Ø 3- Ø 20 mm
Material tray: Ø 3, Ø 4, Ø 6, Ø 8, Ø 10, Ø 12, Ø 16 mm
Filtration system
Magnetic Filter Machine - Suitable for Filter Material HSS
transformer
Variable voltage regulator
Spare belt (for belt type spindle)
gauge block
Measurement standard rod
Fixture for measuring grinding wheel projection
Special options
grinding wheel spindle
Concealed spindle (optional)
• Spindle type HSK-50C
• High precision
• High rigidity and low vibration
• High power and high torque
Automatic wheel exchange system (optional)
Double grinding wheel set, with a maximum of three grinding wheels per set. The spindle type is the built-in spindle HSK-50E, which can be loaded with different series of grinding wheel sets. The coarse grinding wheel, fine grinding wheel, and polishing grinding wheel sets can be replaced for grinding different materials such as tungsten steel, high-speed steel, and stainless steel.
FANUC LR Mate 200iD robotic arm (optional)
The robotic arm holds a load of 7 kilograms and uses dual jaws to accelerate tool replacement time. The diameter range of the rod is Ø 3-20 mm and the length range is 35-150 mm.
Intelligent six axis design, flexible enough to challenge the motion requirements of high difficulty robotic arms.
The use of dual claws showcases the characteristics of high speed.
High precision clamping and positioning
High rigidity and low vibration ensure production quality
According to the diameter of different workpieces, the loading capacity of the material tray varies, and up to 900 rods (3 trays) with a diameter of Ø 3-6 mm can be loaded.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-