GCZL-6536BtypeLow temperature dual tube petroleum product distillation analyzerdetailed introduction

Low temperature dual tube petroleum product distillation analyzerProduct Introduction:

This instrument is designed and manufactured in accordance with the requirements of the People's Republic of China standard GB/T 6536 "Determination of Distillation of Petroleum Products", and is suitable for distillation determination of gasoline, aviation gasoline, jet fuel, solvents with special boiling points, naphtha, diesel, distillate fuels, and similar petroleum products in accordance with the GB/T 6536 standard.

This instrument is suitable for high-frequency and multi sample unit use, and also speeds up the testing speed for general users. It is an ideal petroleum product distillation testing instrument.

​Technical Specifications:
1Working power supply: AC (220 ± 10%) V, 50Hz.

2Heating power of electric furnace: 1300W × 2, continuously adjustable heating power.

3Measuring cylinder volume: 100ml, division 1ml.

4Distillation flask: 125mL, in accordance with the requirements of GB/T 6536.

5Temperature gauge: fully immersed rod type, with scale ranges of (-2)~300)℃、(-2~400)℃。

6Electric furnace activity board: Made of silicon carbide board, with hole diameters of φ 32mm, φ 38mm, and φ 50mm respectively.

7Water bath temperature control: ① Temperature control range: (room temperature+10) ℃~60 ℃ can be set arbitrarily.

② Temperature control accuracy: ± 0.5 ℃.

③ Temperature display mode: LED digital display.

Note: Water bath temperature control refers to temperature control of the condensate in the condenser tube.

8Environmental temperature: ≤+35 ℃.

9Relative humidity: ≤ 85%.

10Power consumption of the whole machine: not exceeding 4000W.

11Dimensions: 760Mm x 520mm x 500mm (length x width x height).

​Key Features:

1、This instrument operates in a dual tube mode, allowing for independent testing of a single tube or simultaneous testing of two samples of the same or different specifications, greatly improving work efficiency.

2, ProcurementUse two independent sets of digital temperature controllers, heaters, and electric mixers to form a condenser tube constant temperature bath, with the temperature inside the bath being(Room temperature can be freely set and adjusted within the range of+10 ℃ to 60 ℃,The temperature inside the bath is uniform and meets the requirements of the experiment.

3Adopting a special heating furnace form to ensure the safety of the test; The heating power is continuously adjustable to meet the requirements of the experiment.