VIP member
Stainless steel polishing solution
Chemical composition information Chemical characteristics: Mixture composition description: It is a mixture of the following products and additives Ha
Product details
Chemical composition information
Chemical characteristics: mixture
Composition description: It is a mixture of the following products and additives
Dangerous ingredients: None
Ingredients: Silica sol/alumina
PH value: 9~10/2~4
Features: Glossiness can reach 1200-1300, Ra<5nm Appearance and properties: Liquid
Melting point (℃): 2600 ℃
Boiling point (℃): No data available
Flash point: None
Spontaneous combustion temperature: The product itself will not spontaneously ignite.
Hazard Information
Classification of substances or mixtures:
According to regulation EC1272/2008, this product is not classified under the CLP regulation.
According to Directive 67/548/EE or 1999/45/EC classification: none.
Tag information:
According to the EU labeling guidelines, the general safety regulations for handling chemicals do not fall within the scope of EC directive regulations and hazardous materials regulations.
Other harmful information:
PBT and vPvB evaluation results: none
First-aid measures
Skin contact:
Immediately remove all contact clothing and rinse with plenty of flowing water. If there are persistent irritation symptoms, consult a doctor.
Eye contact:
Lift the eyelids and immediately rinse with water for a few minutes. If there is persistent pain, seek medical attention immediately.
devour:
Rinse mouth with plenty of water, then drink plenty of water without inducing vomiting. If there are persistent symptoms, seek medical attention.
Inhalation:
If there are any adverse reactions, transfer to fresh air and consult a doctor.
Fire protection measures
suitable extinguishing media
The product itself will not burn, just use a fire extinguishing agent suitable for the site.
Hazardous combustion products: None
Fire extinguishing method:
Fire extinguishing equipment should not inhale explosive or flammable gases. Firefighters must wear self-priming filters and fire-resistant clothing.
Accidental release measures
Minor leakage: Rinse with clean water.
Massive leakage: recycle or transport to waste disposal sites for disposal, and wash the ground clean.
HANDLING AND STORAGE
Precautions for operation:
Sealed operation, providing good natural ventilation conditions. Operators strictly follow the operating procedures.
Storage precautions:
Store in a cool and ventilated warehouse. Stay away from the flames. Close the container tightly when not in use.
Contact control and personal protective measures
Engineering control:
Production engineering should be sealed and ventilated.
Personal protection:
Handle with the same care as general chemical products, and do not eat, drink, smoke, etc. during work. Wash hands after rest and work.
Inhalation protection:
Generally, no special protection is required. When the concentration is too high, wear a mask.
Hand protection:
Wear general protective gloves for homework.
Eye protection:
Generally, no special protection is required. When the concentration is too high, wear protective goggles.
Stability and Reactivity
Stability: Strong stability
Prohibited substances: None
Conditions for avoiding contact: None
Aggregation hazard: None
Decomposition products: No decomposition
toxicological information
Acute toxicity: LD50: LD50 (Rat, Oral) approximately 1g/kg
LC50: No data available
Subacute and chronic toxicity: non-toxic
Irritation: None
Allergenicity: Refer to Category 1
Mutagenicity: none
Teratoxicity: None
Carcinogenicity: None
Ecological information
Ecotoxicity: None
Biodegradability: Normal
Non biodegradable: Normal
Bioaccumulation or Bioaccumulation: Normal
Other harmful effects: No information available
Waste disposal
Waste nature: non-toxic and safe.
Disposal method: Before disposal, relevant national and local regulations should be consulted.
Disposal precautions: None
Other information
The above information is based on existing data information. In actual application, unexpected situations may arise, and the corresponding information may need to be modified. We do not assume responsibility. Please make appropriate and correct decisions based on the actual situation during operation.
Online inquiry