Split type fully automatic CIP cleaning system

Fully automatic CIP cleaning refers to the cyclic cleaning of equipment (tanks, pipelines, pumps, valves, etc.) and the entire production line in a closed circuit without the need for manual disassembly.

The operating principle of the full auto CIP cleaning system means that the tank body，pipelines，pumps and all valves and also the whole processing line are cleaned on line no need to disconnect the pipes or the equipments，all cleanings are done in the closed circuit.

System control parameters:

This system adopts PLC programming control, with a color touch screen to operate and display the entire production process and various control parameters. The temperature of the cleaning solution can be set, the acidity and alkalinity of the tank can be set, the cleaning time can be set, the cleaning sequence can be set, and the acidity and alkalinity of the cleaning reflux can be set. It is equipped with a system fault alarm device.

Technical parameter:

This system adopts the PLC program to control，with the colored touch--screen to operate and display the whole process flow and also the each controlling parameter. The temperature of the cleaning liquid can be set.

It can set the PH value，the cleaning time，cleaning sequence，and also the refluence PH value. With the system malfunction alarm device.

System working principle:

1. Automatic control of cleaning solution flow rate

2. Automatic temperature control of cleaning solution

3. Automatic compensation control of liquid level in the tank

4. Automatic compensation for the concentration of acid and alkali solution in the tank

5. Phase change self-control operation of acid solution, alkali solution, and hot water

6. System alarm device

The operating principle of the system：

1.Auto-flow control for the cleaning solution

2.Automaticaly reglulate thetemperature of the cleaning liquid.

3.Auto-compensate for the inside tank liquid level.

4.Automatically-compensation for the acid and alkali concentration.

5.Auto transfer from one cleaning liquid to another.

6.System auto alarm-device

The main equipment of the system includes:

CIP cleaning solution storage tank (acid tank, alkali tank, hot water tank, clean water tank);

CIP cleaning liquid storage tanks（include acid tank，alkali tank，hot water tank，clear water tank）；

Two single-layer storage tanks for concentrated acid/alkali; Two not big storage single layer tanks for concentrated acid and alkali；

CIP process pump and CIP return pump; CIP forward and retum pumps；

Two concentrated acid (alkali) liquid diaphragm pumps; Two diaphragm pumps for acid/alkali concentrate；

Heat exchanger (plate, tube); Heat exchanger（plate or tubular type）；

An electrical control box; One electrical appliance box；

A set of control pipe valves; One set of controlling pipe and valve component；

A set of automatic execution components and electrical materials; One set of auto-performance componentsand parts and the electrical appliance material；

CIP清洗液储罐： 1000L-10000L； CIP cleaning liquid storage tank：1000L-10000L；

According to customer needs, the system can be made into dual circuit, triple circuit, quadruple circuit, etc., and multiple cleaning circuits can be carried out simultaneously.

According to the customer's requirements，we can make the double circuit，three circuit，four circuit and so on，meanwhile we can make multi circuit operating at the same time.

The heating method can be plate type, coil type, or tube type. The Heating way:plate type，coil tube type，tubular type.