Magnetic electric speed sensor

1、 Overview:

CSZM-99Magnetic electric speed sensor can convert angular displacement into electrical signals for counter counting. It can measure the speed and linear velocity of various magnetic materials such as gears, impellers, and disks with holes (or grooves, screws) without contact. Sensors have the advantages of small size, sturdy and reliable, long service life, and no need for power or lubricating oil, and can be used with general secondary instruments.

2、 Technical parameters

1、 Output waveform: approximate sine wave (≥)50r/minWhen)

2、 Output signal amplitude:50r/minTime ≥300mV

The gap between the sensor core and the measured tooth tip is δ=0.5mm

Tested gear modulem = 2

gear Z = 60

material electrical steel

　　　　 The amplitude of the signal is proportional to the rotational speed and inversely proportional to the gap between the iron core and the tooth tip.

3、 Measurement range:50～5000Hz

4、 Usage time: Continuous use

5、 Working environment: Temperature -20～+60˚C

6、 Output format:X12K4PFour pin plug

7External dimensions: outer diameterM16×1Total length120mm(The total length can be customized according to the user)

8Weight: Approximately100g(Excluding output wires)

3、 Outline drawing:

4、 Precautions for use

　　　1.Sensor housing during installationM16×1The threads must not be damaged, and the hexagonal nut should rotate freely. After tightening the hexagonal nut, there should be no looseness.

　　　2,It is advisable to ensure that the tested gear does not come into contact with the sensor during installation. And we hope to minimize the gap δ as much as possible to improve the output signal amplitude.

5、 Single machine complete set

1.CSZM-99Magnetic electric speed sensor 　　 　 1only

2.Instruction manual 　 1share

3.Certificate of Conformity 　 1share

note appended:

The effective thread length includes:60mm,80mm,100mm,120mm