Special nitrogen generator for liquid chromatography-mass spectrometry(Hollow fiber membrane)

NITROGEN-M-30/60

Peculiar be directed againstLC/MS The special requirements for nitrogen flow rate, purity, and pressure have been specially designed to be safe, efficient, and convenientLC/MS Nitrogen generator, producing purity>99.5% clean and dryNitrogen, compatibleWaters、AgilentNaria、AB Sciex、 Thermo/Finnigan、Shimatzu、Bruker Waiting for brand liquid quality to be used togetherAPCI reachESI Interface. The nitrogen generator adopts membrane separation technology, which can continuously obtain clean, dry, and phthalate free nitrogen without the need for secondary purification. The purity and flow rate of nitrogen are stable, and it can be used Long lifespan. The built-in modular integrated oil-free compressor improves the safety of air supply, without relying on external compressed air sources. Flow rate range from35L/min perhaps70L/min Two models are available to supply nitrogen to one or more instruments simultaneously. Special models can be customized, maximum flowThe speed range can reach 200 L/min

I Main technical parameters I

MAIN TECHNICAL PARAMETERS

◎ Flow rate: 0-35L (70L)/min @ 100psi (7bar)

◎ Working environment: 5 ℃ -40 ℃, humidity 80%

◎ Maximum altitude used: 2200m

Dew point:<-55 ℃

◎ Particles:<0.01 μ m

◎ Retained liquid: None

◎ Phthalic acid: None

◎ Nitrogen purity: 95-99.5%

◎ Oxygen content<1%

◎ Noise:<54dB (A) Noise saving (ECO) mode<20dB (A)

◎ Power on purification time: 30 minutes

◎ Compressors: 2 built-in Thomas compressors from the United States, with an output pressure of 160PSI, ensuring uninterrupted operation for 8000 hours.

◎ Water removal: water storage and drainage system, forced cooling module, 3-level particle filtration drainage.

◎ Power: 1600W

◎ Power requirement: 220V 50Hz

◎ Size: 900 × 600 × 700mm (STROGEN-M-30) 1250 × 800 × 700mm (STROGEN-M-60)

Net weight: approximately 110Kg (NITROGEN-M-30)

About 150Kg (NITROGEN-M-60)