Name: Small can sealing machine
Model: YSJX

Product Introduction
The small can sealing machine is suitable for sealing various circular iron, glass, plastic paper cans, etc. It has reliable quality, simple and lightweight operation, and is an essential ideal equipment for the food and beverage industry.

Product parameters
Production capacity: 15 times/minute Adaptation range:
Can diameter ranging from 45 to 150mm
Can height 39-200mm (cans larger than the above size require customization). Please call to discuss in detail! ）
Spindle speed: 620V/min,
Electric motor: YB02-4 0.37KW
Adjustable speed motor: 40W
Dimensions: 600 × 320 × 700mm
Total weight of equipment: approximately 68Kg

Operation steps of small can sealing machine
1. Preparation before startup.
⑴ Check whether each component is well lubricated.
⑵ Check for loose firmware and damaged power cords.
⑶ Check for any malfunctions or abnormal sounds in the rotating system and motion mechanism.

2. Adjustment. Slowly adjust by pressing the jog switch, rotate the lifting screw, and adjust to the desired height of the can. When sealing the can, it is necessary to pass through the first and second rollers for rolling and tying. By adjusting the position of the rollers, the desired position for sealing the can can can be obtained.

3. Power on and seal the container
⑴ Start the motor and cover the jar filled with materials.
⑵ Place the can on the lower mold of the sealing machine and straighten the can.
⑶ After confirming that the can is placed in the correct position and the lid is properly closed, you can press the foot switch to seal the can.

4. Stop the machine and press the power button

Precautions for Small Can Sealing Machine
When relocating the sealing machine, three or more people must ensure safety before proceeding.
2. It is strictly prohibited to pull or squeeze the power cord.
3. It is strictly prohibited to rinse the body with water (only a damp cloth can be used for wiping).
4. It is strictly prohibited to knock or touch the cover.
5. Normal production is not allowed to adjust the pressure wheel by hand.

Daily maintenance of small can sealing machine:
1. Surface wiping: The equipment surface should be wiped clean and no materials should be placed.
2. Equipment fasteners: Check and tighten all fasteners of the equipment, and lubricate them with oil.
3. The roller should be polished once a day.

other:
Tanks with a height higher than 200mm will be raised, and the price is negotiable.
The original set of molds for the machine (one set of molds with one diameter) and the price of additional molds are negotiable.
Working principle picture of small can sealing machine:

Yusheng electronic brochure display: can be viewed in full screen