product overview

The equipment integrates pressure jet cleaning, online filtration and recovery of cleaning agents, and circulating fine filtration, achieving synchronous cleaning of parts and filtration and recovery of particulate pollutants. It can collect particulate pollutants on the surface of parts to the surface of the filter membrane in a timely manner. After cleaning the parts, the filter membrane sample can be obtained, reducing the retention time of particulate pollutants in the cleaning agent; Subverting the traditional manual manual cleaning and testing methods, standardizing the cleanliness testing and control process, and improving testing efficiency. The operating space for cleaning parts is relatively independent, with a built-in air laminar flow system to purify the cleaning operating environment. An air curtain isolation system is also installed on the personnel operating surface to effectively isolate the cleaning area from the external environment, providing a clean operating platform for cleaning and testing. Real time display of equipment working pressure status, continuously adjustable cleaning and detection pressure, combined with different cleaning nozzles, can quickly and conveniently clean the internal channels, blind holes, and overall surfaces of parts, widely used in various automotive parts cleanliness testing. Meets international and domestic standards such as ISO16232-2007, VDA19, GB/T3821-2005, and cleanliness testing standards of major automobile manufacturers such as Volkswagen, General Motors, and Ford.

Main technical parameters

Equipment model: SinAPC 2000

Category: PA/PM/PU

Overall dimensions (W * D * H): 1600 * 850 * 2100mm

Main frame material: 304 stainless steel, industrial profile.

Size of pressure cleaning operation area (W * D * H): 600 * 500 * 800mm

740*530*800mm

900*700*800mm

Material of pressure cleaning operating room: 304 mirror stainless steel

Cleaning and testing rotating tray: diameter 350mm; Rotation angle: 360 ° (horizontal plane)

Cleaning and testing pressure: 0.1MPa -0.5MPa

Flow range: 0.3L/min-5L/min

Cleaning operation protective gloves length: 360mm (standard L size)

Spray gun membrane replacement filter suitable for filter membrane: Ø 25mm

Spray gun nozzle: cylindrical/fan-shaped/solid conical (standard three types)

Stainless steel storage capacity: 15L

Special solvent cleaning agent: AP760

Cleaning solution circulation filter accuracy: 0.2 μ m

Applicable detection filter membrane: Ø 47 (equipped with three-layer serial filter membrane for sample preparation)

Air purification rate: 99.995% HEPA high-efficiency purification accuracy of 0.3 μ m

Gas supply: 1200m3/h; Exhaust volume: 750 m3/h

Equipment self-cleaning degree: less than 0.2mg

Working power supply: AC220V,50Hz； Power: 550W

Working gas source: ≥ 0.5MPa, gas consumption: 75L/min

Other: Optional robotic arm and deep hole cleaning interface, pressure cleaning and ultrasonic cleaning can be combined, and non-standard customization is available

We have customized experience for large and medium-sized component manufacturers such as BMW, Volkswagen, and General Motors. Thank you for your inquiry.