1Product performance:

1Our company, based on customer needs,In response to the characteristic of oily materials being prone to oil production during the crushing process,After years of research and development, repeated experiments, continuous improvement and enhancement, this product has been developed.

2A153Sesame crusherUsing high-speed steel blades to chop materials at high speed, the contact surface is small and the speed is fast, thus achieving the effect of no oil discharge.

3The whole machine is made of all stainless steel, wear-resistant, durable, and meets food processing standards. The motoradopthalfClosed installation, dustproof, heat-resistant, hygienicbeautyObservation, and the operation is simple, safe and reliable.

4this machineThe particle size can be achieved by increasing or decreasing the number of disc cutters. Too many disc knives，The finer the broken particles; The fewer knives there are, the coarser the broken particles.

IIScope of application:

Food factories, seasoning factories, processing shops, kitchens, restaurants、Dining hallHotels, etc.

Processing scope:

Melon seeds, sesame seeds, almonds, red dates, peanuts, walnuts, white sugar, garlic, ginger, potatoes, chili peppers, onions, lotus roots, and more. Sesame and red dates can be crushed into a uniform powder. Materials with high oil content and high water content can only be ground into mud, fine cut or small fragments.

IIITechnical Specifications

machinemodelA153

workvoltage220V/380V

motorpower2.2KW

Number of disc knives:14turn

Motor speed28000r/min

productionoutput30-80kg/h

processingfineness10-100eye

Machine size long720×wide300×tall760(mm)

machine weight 50kg

4、 Note: The fineness indicated above10-100For different materials, their oil content, sugar content, and water content vary greatly, and the fineness that can be crushed varies greatly. Some materials can be crushed to finer particles, while others can only be ground into coarse particles. Extremely high moisture content/Extremely high oil content/Materials with particularly high sugar content cannot be guaranteed to produce no water after processing by this machine/No oil output/Without forming a slurry, customers are advised to conduct a scientific, objective, and fair evaluation of the materials to be processed before purchasing this machine to avoid unnecessary misunderstandings. If it is not a machine quality issue, our company does not accept returns without reason.

5Instructions for Use:

1、Adjust the number of cutting blades according to different materials;

2、During installation, pay attention to keeping the blade edge consistent with the motor rotation direction;

3、If the production volume is not large and the fineness requirement is high, a sieve can be added for processing. After installing four blades, one sieve can be added, and a total of four sieves can be installed;

4、When the quantity is large but the fineness requirement is not high, there is no need to add a sieve;

5、When processing walnuts, onions, garlic, ginger, oily or large-diameter materials, the distance between the large knives can be adjusted to reduce the number of knives used.

6The feed particle size should be within15Larger materials within millimeters should be crushed or chopped first.

VIMaintenance matters:

1The machine should be placed on a level ground or tabletop;

2Regularly inspect the motor, circuit, belt, and screws of the machine. If any looseness or wear is found, they should be reinforced or replaced in a timely manner;

3After each processing is completed, the machine needs to be cleaned. The blades can be washed with water or wiped clean with a dry cloth before installation, and can be coated with edible oil for protection.

4The blade can be blunt after useUsing oilstonegrind.

7Notes:

1Local disc cutteralreadyThe blade is very sharp, so safety must be taken into account during installation and use. Gloves must be worn when installing and disassembling the blade to prevent cuts.

2Before starting up, check whether the voltage and direction of rotation meet the requirements of the machine.

3During the operation of this machine, a dedicated person should be present to monitor it at all times. If any issues such as machine jamming or abnormal noise are found, the machine should be shut down immediately, the power should be disconnected, the machine should be inspected, and any faults should be eliminated to ensure that there are no problems before restarting.

4After using the machine, please make sure to cut off the power.

5After the power is cut off, the machine can be disassembled and cleaned. When disassembling and cleaning, pay attention to sharp parts such as cutting tools to prevent cuts.

6This machine is only suitable for shredding brittle materials. Customers should ensure that the materials do not contain hard foreign objects such as metals and stones during use, otherwise it may damage the disc cutter and even the motor.

8、 Warranty matters

1This machine comes with a one-year warranty;

2The disc cutter is a vulnerable component and is not covered by the warranty;

3Due to improper external power supply, voltage, operation, or foreign objects causing damage to the disc cutter and other mechanical components, they are not covered by the warranty.