Working principle of dryer/Second hand organic fertilizer dryer manufacturer
1. Wet materials are transported to the hopper by a belt conveyor or bucket elevator, and then enter the feeding end through the feeding pipeline through the feeding machine of the hopper.
2. The slope of the feeding pipeline should be greater than the natural inclination angle of the material, so that the material can flow smoothly into the dryer.
3. The dryer cylinder is a rotating cylinder slightly inclined from the horizontal line. The material is added from the higher end, and the heat carrier enters from the lower end, coming into counter current contact with the material. There are also cases where the heat carrier and the material flow together into the cylinder.Second hand organic fertilizer dryer manufacturer

Liangshan Congrui Machinery Equipment Purchase and Sales Company is a joint-stock enterprise that produces large and medium-sized series of mineral processing equipment, drying equipment, metallurgical machinery, building materials machinery (crushers, sand making machines, ball mills, etc.) and their supporting auxiliary equipment, integrating research and development, production, and sales. Our company strives for survival through quality, develops through win-win cooperation, upholds integrity, seeks common development, and forges brilliance together.
The main products of dryer equipment include three tube dryer, sawdust dryer, sand dryer, ginkgo leaf dryer, corn dryer, drum dryer, chicken manure dryer, grain dryer, sludge dryer, etc.
Main products of ball mill equipment: energy-saving ball mill, dry ball mill, wet ball mill, rod mill, etc.
The main products of mineral processing equipment include crushers, feeders, ball mills, magnetic separators, flotation machines, classifiers, disc granulators, trough feeders, tailings recovery machines, spiral chutes, shaking tables, high-frequency screens, etc.
The main products of sand and gravel equipment include crushers, sand making machines, TK sand making machines, VSI sand making machines, sand washing machines, vibrating feeders, linear vibrating screens, etc.

1. The equipment investment is 20% of the imported products from abroad, and it is made of wear-resistant manganese plate, which is 3-4 times more wear-resistant than ordinary steel plate.
2. The initial moisture content of the material is 15%, and the final moisture content is ensured to be below 0.5-1%. It is a product selected for various drying projects such as cement plant slag powder and dry powder mortar production lines.
3. Improve thermal efficiency by over 40% compared to traditional single drum dryers.
4. The fuel can be used for white coal, bituminous coal, coal gangue, oil, and steam. Capable of drying block, granular, and powdered materials below 20-40mm.
5. Reduce the footprint by about 60% compared to a single drum dryer. Reduce civil engineering investment by about 60% and facilitate installation.
6. No air leakage phenomenon, completely solving the sealing difficulty.
7. If the discharge temperature is ≤ 60 degrees, it can be directly fed into the material warehouse without the need for cooling in the cooling shed.
8. The temperature of the outer cylinder is ≤ 60 degrees, the temperature of the exhaust gas is<120 degrees, and the use time of the dust removal equipment bag is more than twice as long.
Coal consumption is 1/3 of that of a single drum dryer, saving 40% of electricity, and consuming less than 9 kilograms of standard coal per ton.