Equipment name

Dehydration oven

Factory model:

TS881Q-080*2

Working temperature range:

room temperature+10~300℃

Voltage used:

380V/N+3+land/50HZ

Temperature control accuracy:

±1℃

Heating power:

12KW

Temperature uniformity:

±2.5%℃

Blast power:

1100W/380V*1group

Adapt to the industry:

Specifications and dimensions:

Studio size:

800*750*1300

deep*wide*High（mm）

Overall dimensionsabout：

1000*1400*2000(including the protruding part of the top motor)

deep*wide*High（mm）

Overview of Machine Structure:

Adopting air ducts on both sidesSimultaneously apply strong horizontal and vertical pressureExhaust air, top air duct return air circulation, heating element installed in the side air duct of the oven, circulating air motor installed in the oventop，singleOpen the door,The door buckle is fixed with a rocker style upper and lower buckle.

Material for box production:

Outer wall material of the box:

A3The thickness of carbon steel cold rolled plate is1.2mmSheet metal bending, welding, and rivet splicing.

Material of box air plate

SUS304Thickness of brushed stainless steel1.0 mmSheet metal bending machine punching.

Box air duct material

SUS304Thickness of brushed stainless steel1.0 mmSheet metal bending, welding, and rivet splicing.

Box frame material:

5#angle steel

Box reinforcement material:

5#Angle steel, locally used2mmSteel plate bending

Material of the bottom load-bearing frame of the box:

8#channel steel

Top frame material of the box:

5#angle steel

Thickness and material of insulation layer:

100KHigh density aluminum silicate fiber filling with insulation layer thickness of100mm）

Bottom track:

Embedded groove track, using12#Reinforced with channel steel for easy entry and exit of small vehicles.

Outer box coating material:

After rust prevention treatment, the surface is coated with environmentally friendly hammer pattern paint, and the color can be specified by the customer. It is recommended to use silver gray.

Door production method:

Outer wall material:

A3The thickness of carbon steel cold rolled plate is1.2mmSheet metal bending, welding, rivet splicing, surface coated with environmentally friendly hammer pattern paint

Door inner wall material:

SUS304Thickness of brushed stainless steel1.0 mmSheet metal bending, welding, and rivet splicing.

Number of doors:

single door

Door thickness:

100mm

Door Buckle:

Alloy hinges and upper and lower buckle pull rods

Door frame sealing material:

High temperature resistant red environmentally friendly silicone rubber sealing strip forced sealing (with good sealing performance and easy cleaning)

Studio configuration:

SUS304Stainless steel made car,Car size:720*600*1200MM.Small car division10Layers, each layer is equipped with10aSUS304Stainless steel tray, with a thickness of1.5MM.Tray size:480* 680*50MM

exhaust system

Exhaust:

aperture100mmThe air output can be manually adjusted1One, exhaust outward.

Circulating system:

Forced circulation vertical belt horizontal air supply, hot air circulation avoids temperature blind spots inside the box.

Blowing method:

High temperature resistant extra long shaft oven motor with centrifugal fan blades1Set, power:1100W*1Taiwan

Motor device:

top

Heating system:

Heating element:

Stainless steel tubular heating tube with long continuous service life.Quantity and power:2KW*6branch

Notice during testing:

The testing point should be at least away from the inner wall material120Millimeters, at least from the door100Millimeters. The testing time should be at least after reaching the temperature (constant temperature state)30minute.

Standard electrical configuration:

Temperature control device:

Digital display intelligent instrument XGQ-A1200FAutomatic temperature control, constant temperature and beltPIDAdjust. Control accuracy ±1℃.

Time setting device:

HS48S-99.99Timer device, manually adjustable/Automatic switch, starts timing when the temperature reaches the set temperature, and cuts off the heating power when the time reaches the set range.

Time alarm device:

APT/AD16Type sound and light alarm device, set time end alarm prompt.

Control circuit voltage:

220V / 50HZ

Temperature measuring device:

A stainless steel tubeKTemperature sensing device, precise temperature measurement ±1%FS.

Protection system:

Circuit breaker protection,Motor overload protection.

Main control output:

Solid state relay output, contactor output

Product Attachment Description:

Product production cycle:

Processing time15Working days

Random spare parts:

One copy of the user manual, one copy of the instrument manual, one copy of the warranty certificate, and one copy of the certificate of conformity.

Warranty coverage:

The product comes with a one-year warranty (excluding human damage) for all electrical components.

Transportation and Payment Terms:

Freight and tax rate:

The price includes tax invoice, shipping fee, and delivery location specified by the customer (excluding upstairs).