Compared with similar grinding machines, the output has been significantly increased (by 20% -50%) under the same power consumption, saving energy consumption.

2. Added dust collection devices, effectively reducing dust pollution.

3. Turning off the fan discharge reduces the labor intensity of the operators.

4. The host door cover can be opened for easy maintenance and tool replacement.

5. The use of Feng Shui dual cooling effectively reduces the working temperature inside the machine, resulting in good grinding effect on PVC. It is also beneficial for grinding heat sensitive plastics, and can be used to grind some PE and ABS materials.

The working principle of this plastic grinding machine is:

1. The working part of this machine is the cutterhead. High speed particles are partially crushed after colliding with the toothed plate and blade, and are extracted by suction, while larger particles continue to collide and be crushed before being extracted. This reduces the load on the cutterhead, improves the grinding efficiency, and ensures even cooling of the powder.

2. The main advantage of this machine is its low temperature. According to thermal work equivalent: converted into 860 kcal of heat per hour of work. This machine uses external ventilation with an air volume of 50M3/KW. The temperature difference between the inlet and outlet air takes away most of the heat. A small amount of heat is solved by water cooling. Requirement: The inlet temperature of the cooling water should not exceed 25 degrees, and the outlet water temperature should not exceed 45 degrees. In summer, the cooling water flow should be increased appropriately to reduce the temperature.

The purpose of this plastic grinding machine is:

Our factory has developed a series of grinding machines based on foreign technology, which are used for successfully grinding PVC plastics, high-density PE, or other plastics with low to moderate hardness. Through practical operation in plastic product processing plants, it has been proven that adding 20% -30% calcium carbonate to ground powder during processing follow-up can maintain the chemical and physical properties of the product unchanged compared to new materials, and the output can reach 150-450KG (40-80 mesh). Therefore, the equipment is the best equipment for plastic product factories to reduce costs and solve the problem of waste accumulation.