SHZ-82A water bath oscillator properties:
The SHZ-82A water bath oscillator is a biochemical instrument that combines a temperature controlled constant temperature water bath and an oscillator. It is mainly suitable for the oscillation cultivation of various liquid and solid compounds such as biology, biochemistry, cells, and bacterial strains in various universities, medical, petrochemical, health and epidemic prevention, environmental monitoring and other scientific research departments.

SHZ-82A water bath oscillatorMain features:

A: Temperature control * * digital display.
B: When oscillating, there are small waves, but no splashing waves.
C: There is a digital timer.
D: The universal spring bottle rack is particularly suitable for the cultivation and preparation of biological samples for various comparative experiments.
E: Stepless speed regulation, smooth operation, easy and safe operation.
F: The inner cavity is made of stainless steel, which has good corrosion resistance.

SHZ-82A water bath oscillatorMain technical performance:

1 Using power supply:220V 50Hz
II Heating power:1800w
III Timing range:0-120 points (or normally open)
4 Oscillation frequency: start-300 revolutions per minute, adjustable
5 Oscillation amplitude:20mm
VI Constant temperature range: room temperature—100℃
7 Oscillatory method: Horizontal rotation
Eight: Temperature control accuracy:0.1℃
Nine: Water tank size:490×390×170mm
Ten: External dimensions:690×550×490mm

SHZ-82A water bath oscillatorNotice before use:

1. UseSHZ-82A water bath oscillatorPlease read this manual carefully before proceeding.
2. The working surface of the machine should not be excessively smooth (such as tiles, etc.).
3. The electrical rated parameters of the socket provided by the user should not be less than the electrical rated parameters of the machine, and there should be good grounding measures.
4. The whole machine is strictly prohibited from being used in an environment with direct sunlight.
5. The speed control should start slowly from low speed to high speed.
6. The machine may experience some displacement during high-speed oscillation, so it should be monitored by someone during use.

SHZ-82A water bath oscillatorinstructions

1. Load the test bottle and maintain balance. If it is a dual function model, set the oscillation mode. (For detailed settings, please refer to the diagram below *)
2. Connect the power and set the timer according to the surface scale of the machine. If you need to work for a long time, adjust the timer to the "normally open" position.
3. Turn on the power switch and set the constant temperature:
(1) Place the control switch in the "Settings" section, and the temperature displayed on the screen will be the set temperature. Adjust the knob to set it to the desired temperature for your work. (The working temperature you set should be higher than the ambient temperature. At this time, the machine starts heating up and the yellow indicator light is on. Otherwise, the machine will not work.)
(2) Place the control switch on the "measurement" end, and the temperature displayed on the screen will be the actual temperature of the air inside the test chamber. As the temperature inside the chamber changes, the displayed number will also change accordingly.
(3) When heated to the desired temperature, the heating will automatically stop and the green indicator light will turn on; When the heat inside the test chamber dissipates below the temperature you set, a new round of heating will begin.
4. Activate the oscillation device:
(1)Adjust the oscillation speed knob to the desired oscillation frequency.
(2)Turn on the oscillation switch on the control panel, and the indicator light will turn on.
5. Cut off the power after work, and set the speed control knob and temperature control knob to the lowest point.
6. Clean the machine and keep it clean.