 |
particular
drop
*Low power consumption
*Red highlight digital tube 0.56 '
*Input 0-75mV (current divider) can be adjusted to full scale between 200-1999
*Measurement of DC voltages of 2V, 20V, 200V, and 600V |
|
| *Power supply voltage 145V-245V |
| DC voltage measurement |
model |
range |
Maximum Resolution |
Input impedance |
| Input limit |
sc3-DV-2V 0 |
1.999V |
1mV≤2M
|
W |
| ≤100V |
sc3-DV-20V0 |
19.99V |
10mV≤2M
|
W |
| ≤750V |
sc3-DV-200V0 |
199.9A |
100mV≤2M
|
W |
| ≤750V |
sc3-DV-600V0 |
600V |
1V≤2M
|
W |
≤750VMeasurement inaccuracy:0.5%F.S 51Digit(23 |
| ) |
| DC current measurement |
model |
range |
Maximum Resolution |
Input impedance |
| Input limit |
sc3-DA-200mA0 |
199.9mA |
100uA≤1
|
W |
| ≤1A |
sc3-DA-2A0 |
1.999A |
1mA≤0.1
|
W |
| ≤5A |
sc3-DA-5A0 |
5.00A |
10mA≤0.05
|
W |
| ≤7A |
sc3-DA-20A |
20A:75mV |
Determined by the user configured splitter |
| 1.2PerF. S |
sc3-DA-50A |
| 50A:75mVMeasurement inaccuracy:0.5%F.S51Digit(23 |
| ) |
|
| Explanation: When measuring DC current, if it is necessary to configure a current divider with a secondary transformation ratio of 75mV to the standard voltage, a separate divider must be configured when the current input is greater than 5A. |
| Technical Parameter |
Input method |
| single-ended input |
A/D conversion |
| double integral |
measurement speed |
| About 2.5 times per second |
Overflow display |
| “-1”or“1” |
display |
| Red LED(14.2mmH) |
Polarity display |
| Only display "-" Display "-" only |
power supply |
| 145V-245V 50Hz/60Hz |
power consumption |
| ≤1.5VA |
pressure resistance |
| Ac1500V1min |
insulation resistanceDC500V≥100M
|
| W |
weight |
| atc..500g |
Anti series mode interference |
|
 |
 |
 |
|
