Product IntroductionIntroduction-Guangpu Guichuan-

Rural water improvement ultraviolet disinfection deviceIt is a series of products developed and produced for UV water treatment based on the mature application of UV technologyUltraviolet sterilizerGuangpu products have mature technology, diverse categories, and complete qualifications, which can meet the needs of various industries for water disinfection.
The rural water to ultraviolet disinfection device belongs to the category of low flow ultraviolet disinfection equipment, with good and stable sterilization effect, simple and convenient operation, suitable for effective disinfection of household water and rural drinking water transformation.

Product FeaturesFeatures-Guangpu Guichuan-

Rural water improvement ultraviolet disinfection equipment has a wide range of sterilization, rapid sterilization, and can effectively kill microorganisms in water, including bacteria, viruses, fungi, and protozoa (Cryptosporidium and Giardia)

After disinfection, there are no other side effects, no impurities are introduced into the water, and the physical and chemical properties of water remain basically unchanged. It is a reliable equipment for disinfecting and sterilizing drinking water.

Low cost, small footprint, simple installation, easy operation, and convenient maintenance.

maintenancemaintenance-Guangpu Guichuan-

Regular cleaning of quartz casing

Like other types of ultraviolet disinfectors, rural water improvement ultraviolet disinfectors also need to be checked for normal operation and regularly cleaned with quartz sleeves.To clean the quartz sleeve, first turn off the power, remove the dust covers on both sides of the sterilizer, take out the lamp tube, remove the covers on both ends, and then take outO-ring, then slowly extract the quartz tube. When cleaning the casing, use alcohol as a cleaning solution. After cleaning, the operator should not directly touch the surface of the quartz tube with their hands to avoid dirtying and affecting transparency. Align the quartz tube with the water seal holes at both ends, insert the quartz tube with equal clearance at both ends, insert the "O" - shaped rubber ring, slowly and evenly tighten the pressure cap, and do not apply too much force to avoid causing the quartz tube to break. Then conduct a water test. If there is water leakage, gently tighten the pressure cap until there is no water leakage. After that, install the lamp tube and start running again.

instructionsDescription-Guangpu Guichuan-

The rural water improvement ultraviolet disinfection device is horizontally installed indoors, with the bracket fixed on a designated foundation or workbench. (Connect the inlet and outlet) The sterilization device is located indoors. In addition to considering the convenience of water supply and drainage and meeting the requirements of the process flow, attention should also be paid to leaving an installation position that can extract ultraviolet lamps and space. The electrical control box is installed near the device, with a relative humidity of no more than 80 ℃, no corrosive gases, no conductive dust, and no strong vibration and impact.

Rural water improvement ultraviolet disinfection equipment can choose one of the two water outlets as the inlet and one as the outlet according to the pipeline direction. It can be placed horizontally or vertically according to user needs. In order to facilitate the replacement of light and quartz tubes, there should be space of the same length on one side of the equipment.

After product installation, conduct a water test to ensure no water leakage, and then connect the power supply.

After connecting the power supply, the indicator light will turn on to ensure that the lamp head and lamp tube are connected properly. Then, press the "power switch" button on the dust cover and the lamp tube indicator light will turn on. The timer will rotate and wait for 3-5 seconds for the lamp tube to light up. At this time, the equipment will operate normally. After confirming that the lamp tube is on for 3-5 minutes, first open the water valve, and then open the water inlet valve. At this point, the machine will start running.