Beijing Guance Jingdian Instrument Equipment Co., Ltd
Home>Products>Rubber voltage breakdown tester, plastic breakdown voltage tester, withstand voltage tester 50000V
Product Groups
Firm Information
  • Transaction Level
    VIP member
  • Contact
  • Phone
    13911152701
  • Address
    1010, 10th Floor, Building 2, No.1 Courtyard, Liangshuihe Road, Chengnan Street, Changping District, Beijing
Contact Now
Rubber voltage breakdown tester, plastic breakdown voltage tester, withstand voltage tester 50000V
Rubber voltage breakdown tester, plastic breakdown voltage tester, withstand voltage tester, 50000V performance characteristics: (1) Threshold protect
Product details

Rubber voltage breakdown tester, plastic breakdown voltage tester, withstand voltage tester 50000V

Performance characteristics: (1) Threshold protection: does not close the door, even if the power on point experiment starts, the device has no response, and the software has a prompt that the safety door is not closed. (2) Voltage zeroing protection: If there is a sudden power outage during the experiment, it will automatically return to zero position after the next power on, ensuring that the initial voltage is at zero position. (3) Termination voltage protection: The termination voltage can be set by software to ensure that if there is an abnormal rise to the specified voltage during the boosting process, it will automatically terminate and return to zero. Transformer exhaust port to ensure the good operation of the transformer, If there is any odor or burning or smoking phenomenon in the sample during the experiment, it can be eliminated through the exhaust system to increase its service life. (5) Independent grounding protection (6) Short circuit protection (7) Software misoperation protection (8) Leakage protection (9) End of experiment discharge protection





Main configuration: 1. Host unit 2. Discharge device 1 set 3. Computer 1 set 4. Printer 1 set 5. Control software 1 set 6. Test electrode 1 set 7. Fuel tank 1 set 8. Test bench 1 set 9. Instruction manual 1 copy 10. Certificate of conformity 1 copy 11. Packing list 1 copy Preparation before test: 1. Connect power cord, data cord, and grounding wire 2. Check if power cord, data cord, and grounding wire are connected properly 3. After connection, turn on the power main switch and preheat for 15 minutes 4. Open the computer Windows system, double-click the shortcut icon of the voltage breakdown tester software to enter the test operation interface.





Online inquiry
  • Contacts
  • Company
  • Telephone
  • Email
  • WeChat
  • Verification Code
  • Message Content

Successful operation!

Successful operation!

Successful operation!