Squeezing Ganoderma spore powder breaking machineThe material contact area is made of 304 stainless steel (or other materials as required), with low noise, high efficiency and energy saving．

To prevent heavy metal pollution, the stick body can be replaced with ceramic sticks, which can effectively avoid pollution during processing.

Application and Characteristics
1. Suitable for wall breaking processing of Ganoderma spore powder, pine pollen and other products.
No heavy metal pollution is introduced during the processing.

Ganoderma spore powder, pine pollen, bee pollen, algae and other plant spore low heavy metal residual wall processing

Introduction to Ganoderma spore breaking machine

Ganoderma spores have an outer wall composed of chitin that is extremely difficult to digest by human stomach acid. Spore powder that does not break the wall cannot be fully digested and absorbed by the human body. Only by opening this outer wall can the effective ingredients tightly wrapped by the outer wall be maximally utilized and absorbed by the human body. After breaking the wall, the absorption rate of Ganoderma spore powder by the human body can be increased 75 Twice as much. Spore powder with broken walls has stronger in vitro cytotoxicity against cancer cells than non broken spore powder.
Starting from the fundamental principle of ensuring the quality of broken spore powder,Considering operability, the main and practical method for breaking the wall of Ganoderma spore powder in China is the mechanical breaking method,The commonly used equipment is ultrafine grinding vibration mill andSqueezing Ganoderma spore powder breaking machine.Some manufacturers also use ball mills or air flow mills(Jet mill),However, due to high costs, low efficiency, low wall breaking rate, poor hygiene conditions, and significant losses, it has not been widely used.
At present, the main machine used for breaking the wall of Ganoderma spore powder is the ultrafine grinding vibration mill,About90%The above is currently in useGanoderma spore powder breaking machineIt's all like this,This type of machine has been developed for over twenty years,It has been perfected and formed into a series,The main characteristics of this type of equipment are:
1. High wall breaking rate,The general production wall breaking rate can reach85%the above,By appropriately processing the raw materials and extending the processing timebetween,The wall breaking rate can even reach99%.
2.The equipment has formed a series,There are small equipment available for small-scale processing,There are also large-scale equipment that can be mass-produced.
3.The equipment has a cooling jacket,Inject coolant,Low temperature wall breaking can be performed.
4.Breaking the wall in a fully enclosed state can minimize the impact of the environment on the product as much as possible.
5.The device has a wide range of applications,Can be used for breaking the wall of Ganoderma spore powder,It can also be used for ultrafine grinding of various traditional Chinese medicinal materials;Water, alcohol, or other liquids can be added for wet pulverization, or gas can be introduced for protective pulverization; There is no requirement for the particle size of raw materials. It can achieve precise mixing, lamination, and coating operations of two or more materials.
Despite the above characteristics,But vibration typeGanoderma spore powder breaks the wallmachineThe drawbacks are also very obvious:
1.This type of device generates vibration and impact on the medium, and simultaneously rotates and revolves, causing the Ganoderma spore powder to be positively impactedPerform ultrafine pulverization under impact and high-strength shear action,Achieve wall breaking effect.However, due to the inherent characteristics of spore powder, a small amount of spores breaking through the wall may cause a decrease in material fluidity due to the precipitation of spore oil, resulting in insufficient dispersion and direct friction and collision between media. Long term media and media,The friction and collision between the medium and the cylinder wall can cause wear and tear of the body, resulting in heavy metal pollution such as chromium and nickel to the spore powder. The higher the requirement for wall breaking rate, the longer the working time for wall breaking, resulting in more severe pollution. With the increasing emphasis on food safety by the country, the requirements for the content of pollutants in food are becoming stricter (new national standard)GB2762-2012The requirements for chromium and nickel content in some foods have been specifically listed, and the use of such equipment will inevitably decrease.

2.Machine noise is loud and can cause noise pollution to the production environment.
3.The coolant can only circulate on the cylinder wall, causing local overheating and affecting the quality of spore powder, resulting in blackening of the product color,Easy to settle in water, with a grainy texture and poor taste when taken.
4.Poor machine stability and heavy maintenance workload.

CWPseriesSqueezing Ganoderma spore powder breaking machineIt is the latest specialized wall breaking machine independently developed by Pingyuan Chaowei Powder Technology Company according to market demand. Compared with grinding type wall breaking equipment, it uses strong composite extrusion effect,Realize efficient wall breaking,Overcoming the various drawbacks of grinding wall breaking machines, the main features are:.

1　Squeezing Ganoderma spore powder breaking machineSuitable for wall breaking processing of materials such as Ganoderma spore powder, pine pollen, algae, etc. that require cell wall breaking. Can achieve continuous production, large processing volume, high wall breaking rate (up to)99%Above).

2During the processing, there is no friction or collision between the media, and no heavy metal pollution is introduced (see attached heavy metal chromium detection report)

3Low temperature wall breaking, instant full cooling, constantly monitoring the processing temperature of the material contact surface, without affecting the nutritional content of the material. The resulting wall breaking powder has a good taste, no particle precipitation when washed with water, and the color does not turn black.

4 Low noise,No need for sound insulation,Easy to operate.

5 Reliable structure, stable operation, and low maintenance workload.

6 Models with the same output have lower prices.