VIP member
Repair the high and low temperature impact test chamber
Brief description: The maintenance high and low temperature impact test chamber is a testing equipment used in the metal, plastic, rubber, electronics
Product details
Repair the high and low temperature impact test chamber
Repair the high and low temperature impact test chamberTechnical Specifications | |
Temperature range of the test tank |
-65℃— +200℃ |
High temperature tank temperature setting range |
+60℃— +220℃ |
Heating time of high temperature tank |
RT(Room temperature) --+150 ℃ ≤ 40 minutes (at room temperature of+10-+30 ℃) |
Low temperature tank temperature setting range |
－80℃-- －10℃ |
Cooling time of low-temperature tank |
RT(Room temperature) -80 ℃ ≤ 85min (at+10-+30 ℃) |
temperature fluctuation |
±1.0℃ |
Temperature Uniformity |
±2.0℃ |
Impact recovery time |
－55-- ＋85℃≤ 5min. |
refrigeration system | ||
condenser |
Fin type attached platform dispersing hot air fan |
|
evaporator |
Fin type multi-stage automatic load capacity adjustment |
|
expansion valve |
Danfoss components from Denmark |
|
compressor |
*French "Taikang" brand fully enclosed compressor |
|
refrigerant |
Imported environmentally friendly refrigerant R404A from the United States |
|
Refrigeration auxiliary components |
Desiccant (Denmark), oil separator (USA), refrigerant window (Denmark), solenoid valve (Japan), filter (Japan), pressure controller (Korea), shut-off valve (Italy) and other refrigeration accessories are all imported parts.High and low temperature impact test chamber |
|
product structure | ||
Inner box dimensions |
WX H X D: 500 X 600 X 500 (mm) 150 liters |
|
Inner box material |
Mirror stainless steel plate (SUS # 304) |
|
outer box material |
Sandgrain stainless steel plate (SUS # 304) |
|
Insulation material |
a.High temperature tank: Aluminum silicate insulation cotton b. Low temperature tank: High density PU foam |
|
door of the box |
Single panel doors for upper and lower boxes, left opening a. Embedded flat handle b. Rear button: SUS # 304 c. Silicone foam strip |
|
Sample placement rack |
Stainless steel SUS # 304 inner box |
|
heating system |
Fin type heat dissipation tube shaped stainless steel electric heater 1. High temperature slot 6 KW 2. Low temperature slot 3.5 KW |
|
Air circulation system |
1.2 units of 1HP motor 2. Stainless steel extended shaft 3. Multi blade fan (SIROCCO FAN) 4. Specially designed fan forced air circulation system
|
|
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-