A soft capsule is a type of capsule whose interior is filled with capsules and medication. In SoftCapsule machineSpecial attention should be paid to various aspects of the production process, such as the temperature between the ingredients of the soft capsule machine. Wait, it's the key to manufacturing soft capsules.

Generally speaking, in the process of producing soft capsules, for the soft capsule machine, it is necessary to maintain the temperature of the air conditioning in the production workshop at a constant humidity and temperature. Secondly, the indoor temperature of the ingredient room of the soft capsule machine should also be maintained at 20-28 degrees Celsius. RH60% or below, in order to maintain a room temperature of 24-30 degrees Celsius in the drying room, RH40% or below, and the pill room is also very special, the indoor temperature should be controlled at 21-24 degrees Celsius. The indoor temperature of the capsule picking workshop with RH 40% -55% (relatively soft) should also be 20-28 degrees Celsius, and the relative humidity should be below 60%.

This soft capsule filling machine pre processes the comprehensive components by adding pure water, solid granular medical bone glue, additives, vitamins, glycerol, etc. in a certain proportion, and stirring after low-temperature cycling at 70 to 80 ℃. After a period of time, it is vacuum dried. After removing bubbles and some moisture from the glue, place the glue into a gelatin bucket and let the remaining glue heat the gelatin box through a soft capsule filling machine. Then, place the glue into the main roller mold and cool it to a solid state. Then thread the solid rubber skin through the left and right molds of the machine head. The spray injects the drug into the rubber skin, and immediately heats and extrudes it to form a complete seal. The finished particles are transported by a conveyor to the drying system for low-temperature drying.

But it has drawbacks, mainly reflected in its drying system:

From the perspective of device structure, softwareCapsule machineThe drying system is designed based on manual rotary ordinary drying equipment, and the method used is manual drying. Usually, this method is difficult to meet the initial setting requirements of soft capsules. Due to the difficulty in adjusting the speed of the dryer during operation and the inability to flip it regularly, it often falls out.