The specialized steam drying oven for rosewood is developed based on traditional wood drying equipment and combined with the characteristics of rosewood. It is particularly suitable for drying wood such as large leaved rosewood, small leaved rosewood, old rosewood, and yellow rosewood.
1、 Redwood specialized drying equipment, during normal operation, the fuel is fully burned in the combustion chamber, generating heat energy, which is fully absorbed by the drying medium in the heat energy drying system, producing a high temperature of over 180 degrees Celsius. Under the action of the circulating fan, the high-temperature airflow passes through the control system and transmission system, and the high-temperature hot air is transmitted to the drying chamber to dry the wood. At the same time, the steam generation device on the equipment can generate a large amount of atmospheric pressure steam, which can be sent into the drying chamber at any time according to the requirements of the drying process for spraying and humidity control of the wood. The humidity control system is an independent steam system equipped with safety devices. Saturated wet steam can quickly make the surface humidity of wood consistent with the internal humidity, thereby achieving the goal of drying both the inside and outside of wood simultaneously. Intermittent heating and drying technology can be used to solve defects such as internal cracking, end cracking, and deformation of wood during the drying process, greatly improving the yield of high-quality wood products.
The redwood specific steam drying oven is equipped with a heat recovery system, which fully utilizes the drying medium and maximizes the heat loss caused by the discharge of hot and humid air. Significantly increased drying costs and shortened drying cycles. Improved economic efficiency for the enterprise.
2、 Control device
The inlet and outlet ducts of the equipment are equipped with adjustable valves, which can adjust the air volume and swirling air volume at any time according to the requirements of the wood drying process. There is also an adjustable compensation at the inlet of the fan, which can adjust the air pressure and machine volume in the drying room according to the requirements. Equipped with a steam jet valve on the main body of the equipment, the steam jet volume can be adjusted in a timely manner according to the different requirements of wood drying. There is also a combustion assisting device at the lower part of the equipment body. When the fuel does not burn due to various reasons, the combustion assisting valve can be opened to increase the combustion force and reach the temperature required for each drying stage.
3、 Service
1. Provide the civil engineering drawings for the drying room.
2. Provide guidance on equipment installation, debugging, and drying processes.
3. Provide one year of free maintenance and lifelong service for the equipment under normal operation conditions

Main technical parameters:

(For reference only)