Recycling second-hand 1600 flatbed centrifuge priceDue to the high-speed operation of the centrifuge, its motor is prone to overheating. If the motor of the high-speed centrifuge feels hot, then attention should be paid to the operation of the flat centrifuge, which may be related to the heating of the motor bearings. So, what is the reason for the heating of the motor bearings?

1. Cooling fan problems or centrifugal overload or overloading may also be caused by heat generated by mechanical friction, but the main reason is whether the centrifuge bearings are good. If cheap bearings that are easily heated are chosen to save money, it may cause serious laboratory accidents. Therefore, we should choose better branded bearings. You should know that when choosing cheap products, even if the same brand comes from different sources, the quality may vary.

2. Ordinary people do not pay attention to the concentricity of the centrifuge spindle. If the spindle is too coaxial, it is easy to cause bearing heating. At this time, the production of centrifuge motors requires strong technical and production capabilities. In practical society, in order to save costs, some centrifuge manufacturers will purchase raw materials for self-assembly, resulting in spindle concentricity deviation and bearing heating.

3. Pay attention to the lubrication of the motor. High temperature lithium grease should be used. The difference in lithium grease is another major reason for bearing heating. At the same time, careful observation is necessary. If mechanical friction is accompanied by noise and obvious wear of mechanical components, it indicates that there is a problem with the bearings and they need to be replaced. Therefore, it is recommended to purchase branded bearings as a good imported bearing. In addition, the flat centrifuge is a high-speed equipment, and high speed is used to ensure the long-term normal operation of the centrifuge bearings.