ESP-LXModular series Chinese control system
characteristic The basic type is 8 stations, and can be expanded to 32 stations in increments of 4 or 8 stations.
Hot swappable module, which can add or remove modules without stopping or restarting when the controller is working.
Simplified Programming (ESP): The self prompted large character dot matrix Chinese character display makes programming simple and easy to read and understand.
4 independent programs, each with 8 startup times, and the same controller allows for mixed spray use.
A 365 day calendar with leap years, allowing for one-time setting of time and date.
5 cycle modes (optional, cycle, single day, single day 31, and even day) are available for selection, reducing spray restrictions and providing greater flexibility.
All programs (in any loop mode) have a calendar day stop spraying option, which can set any day of the month as the stop spraying day.
The default function of contractors can store customized default programs, which can be easily called out in the future. The scheduled recovery function can set a specific date (which can be extended up to 90 days) for the controller to automatically restore stored programs.
Adjust according to the program or monthly season, up to a maximum of 300%.
The rainfall delay function can cause the system to stop spraying during a specific period and then restart.
The manual water spraying function (i.e. on the turntable) can run a single valve, multiple valves, or the entire program. Manual spraying operation does not change the established spraying program.
The valve delay function can restore the water level of the well or store water in the reservoir, reducing the formation of eddies.
The intermittent spraying function of the station divides the total spraying time into multiple time periods for spraying.
Equipped with main valve pump wiring terminals, programmable by station, optimized spray control.
The dedicated sensor wiring terminal allows users to easily connect the sensor, maximizing water utilization efficiency.
The sensor ignore function allows users to avoid working sensors by site.
The built-in diagnostic function allows users to confirm program information, calculate the number of runs of all programs and valves, run test programs, and open all valves one by one.
|
The self setting circuit breaker in diagnostic mode can identify valve or wire faults while continuing normal station operation.
Enhanced diagnostic feedback function alerts for programming errors and other situations that may cause the program to malfunction. You can see that the red light is on and the relevant text information is displayed on the screen
The fast station detection function can quickly diagnose faults in field circuits and electromagnetic heads.
The built-in lithium battery can store time and date up to 10 years and program up to 100 years in the event of a power outage.
◆ New IQ with RainbirdTMThe central irrigation control system is compatible.
Operating parameters
◆Site running time: All sites run for 0-12 hours (within 0-120 minutes, increments of 1 minute; above 120 minutes, increments of 10 minutes).
◆ Automatic startup: Each program has 8 startup times per day, for a total of 32 startup times.
The independent program options make each program different: choose the day of the week, spray water on a single day, spray water on two days, and choose a spraying cycle from 1 to 31 days.
Electrical parameters
Input: 230VAC ± 10%, 50Hz
Output: 26.5VAC 1.9A
◆ Backup battery: button lithium battery with storage date and time, permanent memory storage program
◆ Station capacity: 2 AC24V, 7VA solenoid valves and 1 main valve per station
|
|
ESP ModularSeries module controller
characteristic
The basic type of module controller is 4 stations, and by adding 3 stations per unit, the controller can be easily expanded to 7, 10, and 13 stations.
◆ Hot plug and hot unplug function, whether the controller is running or in any position, it can be easily upgraded by adding or removing modules without cutting off the power.
The system default program can be restored to its original settings at any time by pressing a button, and modified or new programs can be easily loaded and inputted.
Enhanced diagnostic feedback, when sensor interruption, short circuit, and program error occur, the LCD display will display alarm and prompt information.
The auxiliary station (13th station) can ignore sensor signals and spray, or it can be used as a regular station for spraying.
◆ Station delay setting, allowing for a delay between two stations to replenish water sources or slowly close valves to prevent water hammer.
New function: Control the main valve or pump station.
365 day calendar with adjustable time settings. And it will not affect the setting of even and odd day sprinklers due to leap years
Four spray cycle modes: regular weekly cycle, 31 day cycle, and single/double day cycle.
◆ Permanent memory, the program is not lost when the power is turned off.
◆ Backup lithium battery, can support program storage for 5 years in case of power failure.
The option to stop spraying on event days can be set to any day of the week for regular maintenance or system upkeep.
◆ Water spray ratio adjustment, easily achieve water spray ratio adjustment (0-200%) through buttons according to the season and needs.
◆ Dedicated sensor terminal ensures the most efficient use of water and displays the real-time operation status of the sensor on the LCD screen.
◆The sensor ignore switch allows users to ignore the sensor sensing signal and perform spraying.
|
Identify the faulty site and continue spraying at other sites.
Valve testing terminal helps installation personnel timely test the wiring status of each station during the installation process and ensure that each station is connected correctly.
Large space cabinet design, easy to install and operate, with box lock design for outdoor models.
◆ Add new function: Control the main valve and pump station.
operating range
◆ Three independent running programs, each program can set up to 4 startup times
Spray cycle: You can choose to spray on odd days, even days, spray at intervals of 1-31 days, or specify a day on a weekly basis
◆ Running time per station: 0-6 hours (in increments of 1 minute)
◆ Daily spraying frequency: 12 times (4 times per program)
◆ Spray ratio adjustment: 0-200%
Electrical parameters
Input: AC230V ± 20%, 50Hz
Output: AC25.5V, 1A
◆ Can simultaneously activate two solenoid valves and one main valve (or pump start relay)
◆ Provide two sensor terminals
|
