We can design and customize the most suitable oven for you based on the characteristics of the material baking process. Consultation Hotline

Box structure material:

1. Outer wall material of oven: usingA3Cold rolled steel plate welding production, surface sprayed with green anti rust paint after treatment (color can be customized)

2. Studio materials:SUS304 stainless steel plateSpray high-temperature resistant silver powder paint on the surface

3. Strengthen materials:5#Angle steel and8#Channel steel reinforcement

4. Layering inside the box: drawer style tray, 4 layers on each side, for a total of 8 layers

Oven temperature control section:

1. Temperature controller: using intelligent temperature control instruments,PIDAdjustment, with automatic temperature control and constant temperature function.LEDDisplay, Instrument

The upper row represents the actual temperature inside the box, while the lower row represents the temperature set by the user. When the actual temperature inside the box is the same as the set temperature

It can achieve temperature to start timing and time to alarm prompt. (Temperature can be controlled in stages and at different times according to customer requirements)

2. Heating element: A tubular heating tube is used, and the shell material is carbon steel pipe.

3. Installation position of heating tube: inside the air ducts on both sides of the oven liner

4. Oven operating temperature: room temperature--250Degree, maximum achievable300Degree, adjustable at will

5. Temperature control sensitivity: positive or negative1degree

6. Heating rate:5--6degree/min

Hot air circulation section:

1. Blower motor:1A 1100W blower motor is installed at the top of the oven

2. Air supply method: Strong pressure air supply method means that the oven is equipped with guide ports on both sides, and hot air is drawn out from the guide ports on the left and right sides of the box, with suction in the middle.

3. Install a high-temperature resistant long shaft motor at the top, with the wind turbine connected to the motor, to ensure that there is a large amount of hot air circulating inside the drying area and providing constant temperature timing function1S—99.99HThe constant temperature time can be set arbitrarily between them. When the constant temperature time is reached, the heating power supply will be cut off and an alarm will be triggered

Thermal insulation material between boxes: High temperature resistant aluminum silicate cotton is filled between the inner and outer walls of the oven equipment, with a thickness of100mm

After-sales service

Warranty for the entire equipment produced by Yuyang Electric Heating Equipment Co., Ltd12If there are any problems with our company's products within the next month, please read the contents of this manual carefully. If there are technical issues or repair difficulties that require our company's service, please inform us of the model and production number. Our company will provide dedicated service. After sales response time24After the warranty period expires, lifetime paid service will be provided.