VIP member
Purchase/wholesale price of microwave zirconia drying equipment
Microwave zirconia drying equipment is widely used for drying and dehydrating packaging materials of chemical products. For example, lithium hydroxide
Product details
Product Introduction
Microwave zirconia drying equipment is widely used for drying and dehydrating packaging materials of chemical products. For example, lithium hydroxide, nickel hydroxide, etc., when heated by microwave, thermal energy does not need to be conducted and directly acts on zirconium hydroxide, resulting in a fast heating and drying speed. The moisture content reaches below 0.5% after drying from 40%, and the drying time only takes 6-15 minutes. The drying temperature can be controlled.
1Microwave zirconia drying equipmentFeatures:
Conventional heating methods such as flame, hot air, steam drying, etc. all utilize the principle of heat conduction to transfer heat from the outside to the inside of the object being heated, gradually increasing the temperature at the center of the object, which is called external heating. It takes some time to reach the desired temperature in the central area, and objects with poor thermal conductivity require even longer time. These traditional drying methods have long drying times, high power consumption, uneven heating, flipping up and down, and high labor intensity. However, microwave drying has the characteristic of penetrating the inside and outside of the object while heating at a frequency of 2450MHz. With 2.45 billion oscillations per second, water molecules also oscillate 10000 times. Molecules rub against each other to generate heat, generating their own heat. When the temperature reaches above 60 ℃, the water gradually turns into steam and is discharged through the dehumidification pipeline. just becauseMicrowave drying equipmentIt is heated from the material body, transferring the moisture of the material outward, and the dehydration speed is extremely fast, which can greatly improve production efficiency.
There is a significant difference between microwave heating and traditional heating methods. Traditional heating methods rely on a heat source to first heat air or other media through conduction, convection, and other pathways before transferring them to the surface of the object. Then, through thermal conduction, they slowly infiltrate and gradually increase the internal temperature from the surface to the interior. The heat transfer rate inside most objects is very slow, such as ordinary materials, so it takes a long time to achieve overall heating of the object. At the same time, it is easy to cause uneven heating and drying of objects, with significant differences between the inside and outside, affecting the quality of the heated object and even changing its color and physicochemical properties. Microwave heating has a unique heating method, where the material is heated and dried both inside and outside simultaneously.
2、 Microwave drying process of zirconium hydroxide:
Materials to be dried → Special feeding hopper → Conveyor belt → Microwave suppressor → Microwave drying oven → Moisture removal system → Temperature control system → Microwave suppressor → Discharge hopper → Finished product
3、 Precautions for Microwave Drying of Zirconia Hydroxide:
1. Before drying zirconia, the wet material is quite sticky. Our company has designed a dedicated zirconia discharge hopper to ensure even discharge.
2. The water vapor evaporated during the drying process of zirconia is corrosive, and any place that comes into contact with the water vapor of zirconia should be treated with anti-corrosion measures.
4、 The main applications of microwave zirconia drying equipment include glass fiber, chemical raw materials, starch cobalt oxalate, cellulose (such as hydroxyethyl cellulose, carboxymethyl cellulose, etc.), nickel hydroxide, lithium cobalt oxide, graphite, carbon brush, silicon carbide, calcium chloride dihydrate, activated carbon, zirconium oxychloride, zirconia, zirconia hydroxide, zirconium carbonate, zirconium sulfate, ammonium zirconium carbonate, zirconium silicate, potassium zirconium carbonate, oil-based ink drying agent, water-based ink cross-linking water resistant agent, expandable graphite, various ceramic zirconia, nano iron oxide, etc.
5、 Characteristics of Zhiya Microwave Equipment:
Zhiya Microwave has over 10 years of experience in the research and manufacturing of industrial microwave equipment, and can customize sterilization equipment according to customer production capacity requirements. The equipment is entirely made of stainless steel, and the electrical components are from well-known national standard brands. High safety, reliability, and long service life. The service life of microwave generators (magnetrons) can reach over 8000 hours. All electrical and mechanical components are covered by a three guarantee policy, during which our company provides services unconditionally. Lifetime technical service after the warranty period. To ensure that every device meets quality requirements and maintains high-quality brand quality, we conduct comprehensive testing for each processing step and only allow assembly after passing the test. After the equipment is assembled and accepted, it undergoes comprehensive testing and debugging before leaving the factory. Long term free technical consultation and lifelong free software upgrades for products. If on-site maintenance is required by Party B, Party B shall arrive at Party A's site as soon as possible upon receiving the service request to ensure the normal production of Party A. During the equipment installation process, free personnel will be dispatched to assist with the service. Within one year, if the equipment components are damaged due to technical quality issues, the design party shall be responsible for it free of charge. In order to facilitate customer visits and inspections, the company has a multifunctional laboratory for customers to visit and conduct experiments.
6、 Advantages of microwave zirconia drying equipment:
1. The dried product has good quality and high quality.
2. High thermal efficiency. Due to the direct source of heat from the interior of the dry material, the loss of heat in the surrounding medium is minimal. In addition, the microwave heating chamber itself does not absorb heat or microwaves, and all of it is emitted to act on the material, resulting in high thermal efficiency.
3. Microwaves can instantly penetrate the heated material, requiring only a few seconds to minutes of heating without preheating, and can be used immediately upon startup. Stopping heating is also instantaneous, with no residual heat.
4. The microwave power is adjustable, and users can adjust different microwave powers according to the requirements of the material during use.
5. Due to the simultaneous heating of various parts of the object being heated, the entire object can be uniformly heated both inside and outside, without the large temperature difference between the surface and interior of the object caused by conventional conduction heating.
6. Easy to control, convenient and flexible to operate. Automatically control heating time and drying temperature.
7. Microwave energy acts directly on materials with minimal energy loss.
8. The entire equipment is made of industrial grade stainless steel.
9. Low production intensity and minimal land occupation.
10. Effort saving, process saving, especially easy to connect with the front and rear processes in an automatic line, reducing the number of handling times.
11. Environmentally friendly, with no discharge of sewage, polluted gas, or waste residue. The usage environment is clean, hygienic, and noise free.
1Microwave zirconia drying equipmentFeatures:
Conventional heating methods such as flame, hot air, steam drying, etc. all utilize the principle of heat conduction to transfer heat from the outside to the inside of the object being heated, gradually increasing the temperature at the center of the object, which is called external heating. It takes some time to reach the desired temperature in the central area, and objects with poor thermal conductivity require even longer time. These traditional drying methods have long drying times, high power consumption, uneven heating, flipping up and down, and high labor intensity. However, microwave drying has the characteristic of penetrating the inside and outside of the object while heating at a frequency of 2450MHz. With 2.45 billion oscillations per second, water molecules also oscillate 10000 times. Molecules rub against each other to generate heat, generating their own heat. When the temperature reaches above 60 ℃, the water gradually turns into steam and is discharged through the dehumidification pipeline. just becauseMicrowave drying equipmentIt is heated from the material body, transferring the moisture of the material outward, and the dehydration speed is extremely fast, which can greatly improve production efficiency.
There is a significant difference between microwave heating and traditional heating methods. Traditional heating methods rely on a heat source to first heat air or other media through conduction, convection, and other pathways before transferring them to the surface of the object. Then, through thermal conduction, they slowly infiltrate and gradually increase the internal temperature from the surface to the interior. The heat transfer rate inside most objects is very slow, such as ordinary materials, so it takes a long time to achieve overall heating of the object. At the same time, it is easy to cause uneven heating and drying of objects, with significant differences between the inside and outside, affecting the quality of the heated object and even changing its color and physicochemical properties. Microwave heating has a unique heating method, where the material is heated and dried both inside and outside simultaneously.
2、 Microwave drying process of zirconium hydroxide:
Materials to be dried → Special feeding hopper → Conveyor belt → Microwave suppressor → Microwave drying oven → Moisture removal system → Temperature control system → Microwave suppressor → Discharge hopper → Finished product
3、 Precautions for Microwave Drying of Zirconia Hydroxide:
1. Before drying zirconia, the wet material is quite sticky. Our company has designed a dedicated zirconia discharge hopper to ensure even discharge.
2. The water vapor evaporated during the drying process of zirconia is corrosive, and any place that comes into contact with the water vapor of zirconia should be treated with anti-corrosion measures.
4、 The main applications of microwave zirconia drying equipment include glass fiber, chemical raw materials, starch cobalt oxalate, cellulose (such as hydroxyethyl cellulose, carboxymethyl cellulose, etc.), nickel hydroxide, lithium cobalt oxide, graphite, carbon brush, silicon carbide, calcium chloride dihydrate, activated carbon, zirconium oxychloride, zirconia, zirconia hydroxide, zirconium carbonate, zirconium sulfate, ammonium zirconium carbonate, zirconium silicate, potassium zirconium carbonate, oil-based ink drying agent, water-based ink cross-linking water resistant agent, expandable graphite, various ceramic zirconia, nano iron oxide, etc.
5、 Characteristics of Zhiya Microwave Equipment:
Zhiya Microwave has over 10 years of experience in the research and manufacturing of industrial microwave equipment, and can customize sterilization equipment according to customer production capacity requirements. The equipment is entirely made of stainless steel, and the electrical components are from well-known national standard brands. High safety, reliability, and long service life. The service life of microwave generators (magnetrons) can reach over 8000 hours. All electrical and mechanical components are covered by a three guarantee policy, during which our company provides services unconditionally. Lifetime technical service after the warranty period. To ensure that every device meets quality requirements and maintains high-quality brand quality, we conduct comprehensive testing for each processing step and only allow assembly after passing the test. After the equipment is assembled and accepted, it undergoes comprehensive testing and debugging before leaving the factory. Long term free technical consultation and lifelong free software upgrades for products. If on-site maintenance is required by Party B, Party B shall arrive at Party A's site as soon as possible upon receiving the service request to ensure the normal production of Party A. During the equipment installation process, free personnel will be dispatched to assist with the service. Within one year, if the equipment components are damaged due to technical quality issues, the design party shall be responsible for it free of charge. In order to facilitate customer visits and inspections, the company has a multifunctional laboratory for customers to visit and conduct experiments.
6、 Advantages of microwave zirconia drying equipment:
1. The dried product has good quality and high quality.
2. High thermal efficiency. Due to the direct source of heat from the interior of the dry material, the loss of heat in the surrounding medium is minimal. In addition, the microwave heating chamber itself does not absorb heat or microwaves, and all of it is emitted to act on the material, resulting in high thermal efficiency.
3. Microwaves can instantly penetrate the heated material, requiring only a few seconds to minutes of heating without preheating, and can be used immediately upon startup. Stopping heating is also instantaneous, with no residual heat.
4. The microwave power is adjustable, and users can adjust different microwave powers according to the requirements of the material during use.
5. Due to the simultaneous heating of various parts of the object being heated, the entire object can be uniformly heated both inside and outside, without the large temperature difference between the surface and interior of the object caused by conventional conduction heating.
6. Easy to control, convenient and flexible to operate. Automatically control heating time and drying temperature.
7. Microwave energy acts directly on materials with minimal energy loss.
8. The entire equipment is made of industrial grade stainless steel.
9. Low production intensity and minimal land occupation.
10. Effort saving, process saving, especially easy to connect with the front and rear processes in an automatic line, reducing the number of handling times.
11. Environmentally friendly, with no discharge of sewage, polluted gas, or waste residue. The usage environment is clean, hygienic, and noise free.
Specifications
Microwave zirconia drying equipmentBasic Parameters:
Model: ZY-60HM
Power supply: Three phase five wire 380V ± 10% 50Hz ± 1%
Microwave output frequency: 2450 ± 50MHz
Microwave output power: 60 kW (adjustable)
Dehydration efficiency: 60 kg/hour
Environmental temperature: 5-40 ℃ Relative humidity: ≤ 80%
Dimensions (length x width x height) approximately: 14700 x 1460 x 1700mm
Microwave leakage: in accordance with the national GB10436-89 standard ≤ 5mw/cm2
Compliant with GB5226 Electrical Safety Standard
Model: ZY-60HM
Power supply: Three phase five wire 380V ± 10% 50Hz ± 1%
Microwave output frequency: 2450 ± 50MHz
Microwave output power: 60 kW (adjustable)
Dehydration efficiency: 60 kg/hour
Environmental temperature: 5-40 ℃ Relative humidity: ≤ 80%
Dimensions (length x width x height) approximately: 14700 x 1460 x 1700mm
Microwave leakage: in accordance with the national GB10436-89 standard ≤ 5mw/cm2
Compliant with GB5226 Electrical Safety Standard
Application field
Adapt to the drying of various chemical products and raw materials,.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-