Pulse Burner Series KIO/KIC

The KIO/KIC pulse burner comes with a fixed length steel burner tube and requires a burner brick or extended metal burner tube. KIC type burner requires a silicon carbide ceramic sleeve TSC. Modular design, power range 20-1000KW, direct/with small fire nozzle ignition, monitoring. Full combustion and low pollutant emissions. Specially designed and manufactured for customers for different gases and purposes.

KIO series burner (with burner brick type)

The length of the burner tube of KIO burner

According to the type of burner head, the length of the burner tube is:

R. K-type burner head: L1=L2+15mm,

H-shaped burner head: L1=L2+65mm.

The length of the burner tube of KIC burner

The insertion depth of the burner is the sum of the lengths of the steel burner tube and the ceramic sleeve (L1+L8). When selecting this length, the nozzle should be inside the furnace wall, with a maximum distance of no more than 50mm from the furnace wall.

KIO (A) burner is equipped with an additional burner tube

The length L1 of the burner refers to the length of the burner tube and the additional burner tube.

The position of the burner head is determined according to the following formula (Figure 5):

L2=W ± 50mm.

The determination of L1 is shown in the table below

L1=L2+L1-2

Installation diagram of hood type furnace burner

Application conditions of KIO burner

To achieve the optimal combustion state, the shape and flame of the burner brick should be matched with the specific application conditions