1： Product Overview

SCYG4103 high-precision transmitter, with single crystal silicon as the core of the sensor, measures gauge pressure, negative pressure, and absolute pressure. The core components of the product are selected from international first-line brands, with built-in signal conditioning circuits that convert sensor signals into standard current, voltage, or digital signal outputs. It can be directly connected to computer interface cards, control instruments, intelligent instruments, or PLCs. After long-term aging and stability screening, the product performance is stable and reliable, suitable for outdoor environments with harsh conditions. At the same time, it can display on-site pressure, zero point, and full range migration.

2： Product Features

1. Stainless steel structure, small size, light weight, anti-interference, corrosion-resistant

2. High precision, high output, shock resistance, and vibration resistance

3. LCD display, simultaneously outputting signals

4. Equipped with short-circuit protection and reverse polarity protection

3： Typical applications

1. Control of various industrial processes

2. Petrochemical industry

3. Metallurgy

4. Power industry

4： Performance indicators

5： Selection Table

Please contact the sales engineer to assist you in selecting and confirming specific technical parameters.

When selecting, please pay attention to the compatibility between the tested medium and the contact part of the product.

If the ordered product requires a metrological verification certificate or other special requirements, please consult with our company and indicate it in the order

6： Outline structure diagram

7： Precautions for installation of universal pressure sensors

1. The product is vertically installed on the on-site pressure interface.

When installing outdoors, the transmitter should be placed in a ventilated and dry place as much as possible, avoiding direct exposure to strong light and rain, otherwise it will cause performance degradation or malfunction.

When the product is installed in a thunderstorm prone area, it should be specified as "lightning protection" when ordering. At the same time, it is recommended that users install lightning protection devices on site and ensure reliable grounding of the product and power supply to reduce the probability of lightning damage to the transmitter.

If the transmitter is found to have no output or abnormal output after installation, please check:

Is the electrical connection accurate and secure;

Is the power supply voltage too low and is the load resistance too high.