Beijing Jiayi Analysis Equipment Co., Ltd
Home>Products>Portable Curie point pyrolysis instrument JCI-22
Firm Information
  • Transaction Level
    VIP member
  • Contact
  • Phone
  • Address
    Unit 201, Building 17, Courtyard 11, Dongba Middle Street, Chaoyang District, Beijing
Contact Now
Portable Curie point pyrolysis instrument JCI-22
Portable Curie point pyrolysis instrument JCI-22
Product details

Instrument Introduction

1. The general thermal cracking temperature is 500-600 ° C, so it cannot be operated by handheld methods. Therefore, previous thermal cracking equipment could only be fixed and used on GC or GC/MS. Compared with this, the JAI portable Curie point pyrolysis instrument does not generate excess heat due to the use of Curie point heating, and does not burn the operator when introducing gas samples.


The miniaturization of mechanical components and the highly integrated development of electronic components have made it possible to miniaturize the JAI portable Curie point pyrolysis instrument.


3. Eliminated the installation work of thermal cracking equipment
When installing a general thermal cracking device on GC or GC/MS, the vacuum system should be stopped first and the carrier gas flow path should be changed. After installation, the vacuum system should be restarted until it reaches normal values, which takes at least 3 to 6 hours. But the JAI portable Curie point pyrolysis instrument eliminates these tedious processes and can directly vaporize solid samples and inject them into the injection port of GC or GC/MS. This is an unprecedented global first thermal cracking device.


4. Compatible with other types of accessories
Even if the GC/MS is equipped with accessories such as an automatic sampler, it does not need to be removed. The JAI Curie point sampler can directly inject samples from other injection ports.


5. Enable multiple injection methods.

main features

1. Solid, liquid, solid degassed substances, and volatile compounds can be directly injected into the injection port of a gas chromatograph or gas chromatography-mass spectrometer, just as simple as injecting liquid samples with a microinjector.


2. It eliminates the tedious process of installing a thermal cracking instrument in the past. The operator can directly insert the probe into the injection port of GC/MS for thermal cracking GC injection.


3. After each injection of the sample, cleaning or replacing the injection needle is simple and easy, and will not cause contamination of the sample tube or GC flow path.


4. Easy to carry, the standard 5L gas cylinder (JCI22 type) can be used in conjunction with a portable GC for easy operation at any time.

Technical Parameter

JCI-22 Technical Parameters
Injector section
Heating method
Curie point heating method
Sample heating
Hot foil heating (160-1040 ℃)
System preheating
150℃
Sample tube
Quartz tube (outer diameter 6mm, length 42mm)
syringe
JCI dedicated injection needle (outer diameter 0.47mm, length 36mm)
The signal line
2m
size
Outer diameter 35 × 180mm
weight
110g
controller
High frequency power supply
48 W、600kHZ
output signal
GC start signal
Inject helium gas
Provide helium gas with a pressure of over 0.5Mpa from a 5L clamp container bottle
size
150(W)×200(H)×320(D)mm
quality
8kg
power supply
AC85-240V 500VA(MAX)
JCI-22S Technical Parameters
Carrier gas (He)
Supply helium gas with a pressure above 0.5Mpa
Online inquiry
  • Contacts
  • Company
  • Telephone
  • Email
  • WeChat
  • Verification Code
  • Message Content

Successful operation!

Successful operation!

Successful operation!