1. The moving cone rotates continuously, and the material crushing and unloading processes alternate continuously along the working surface, resulting in high productivity.

2. The material is sandwiched between two cones and subjected to compression, bending, and shearing, making it easy to break and consuming less power.

3. The material quality of the product is relatively uniform, with a cubic shape, and the wear on the working surface of the moving cone is also relatively uniform.

4. Structure Introduction, ConecrusherIts structure mainly consists of a frame, horizontal axis, dynamic cone, balance wheel, eccentric sleeve, upper crushing wall (fixed cone), lower crushing wall (dynamic cone), hydraulic coupling, lubrication system, hydraulic system, control system, etc.

5. Both the moving cone and the fixed cone are positioned upright. When the moving cone swings, there is a parallel band with equal gap between them near the discharge port of the crushing chamber, which ensures uniform material quality of the finished product. The size of the feed inlet is not large, and it can handle materials that have undergone initial crushing.

6. This series of cone crushers adopts two sealing methods, dry oil or water, to prevent dust and impurities from entering the body, thereby ensuring the cleanliness of lubricating oil, extending the service life of sliding bearings and thrust ball bearings, and making the machine operate reliably.

Spring conecrusherSuitable for crushing hard and medium hard ores and rocks, such as iron ore, copper orelimestoneQuartzgranite、basaltic rockDiabase, etc. are widely used in the metallurgical industry, construction industry, road construction industry, chemical industry, and phosphate industry.Spring cone breakageThe crusher is the earliest type of cone crusher, which was developed based on the digestion and absorption of various types of cone crushers with international advanced levels in the 1980s from various countries. The spring safety system is an overload protection device that allows metal foreign objects to pass through the crushing chamber without harming the machine. It adopts two sealing forms, dry oil or water, to isolate the stone powder from the lubricating oil and ensure reliable operation. The type of crushing chamber is determined by the purpose of the ore, and the standard type is suitable for medium crushing; Medium size is suitable for fine crushing; Short head type is suitable for ultra-fine crushing.

Spring conecrusherThe working part consists of two truncated cones, one is a fixed cone (also known as an outer cone) and the other is a moving cone (also known as an inner cone). In the section where the moving cone approaches the fixed cone, the material is compressed, impacted, and bent by the moving cone, forming a crushing chamber; At the point where the moving cone deviates from the fixed cone, the crushed material is discharged from the bottom of the cone under its own weight, becoming the discharge port, and the material is loaded from the feed port.Spring cone breakageWhen the crusher is in operation, the motor drives the large bevel gear at the bottom of the eccentric sleeve through a hydraulic coupling and a small bevel gear, causing the eccentric sleeve to rotate and the cone to swing and crush the material.