The PEL-5000C series has an independent control and display panel, constant current/constant resistance/constant voltage/constant power/dynamic mode, and with 150 sets of storage/call memories on the panel, it can effectively control the settings of all loads. It can also be remotely controlled through interfaces such as RS232, Ethernet, USB, and GPIB.
Equipped with short-circuit testing function and set short-circuit time, it can measure short-circuit voltage and current. In constant current and constant power modes, dynamic load simulation can be performed, and the rising and falling slopes of the current are independently adjustable, with additional features Dynamic load function for external input of arbitrary waveforms. Equipped with OCP and OPP single key testing functions, making OCP and OPP testing more efficient and accurate. The adjustable load stop (LOAD ON/OFF) voltage point and CO/NG comparison judgment function, voltage polarity display can be positive or negative, and 150 sets of storage/call memory make the load more suitable for various applications. The storage function of up to 150 sets of test parameters and states allows it to retrieve and use the stored memory at any time according to the requirements of automatic testing (Auto Sequence). Due to its high voltage resistance of up to 1200V, it is highly suitable for testing applications of power factor regulators (PFC). The maximum number of master/slave controls is 1 MASTER and 7 SLAVE