VIP member
Overview and Model Codes of Ball Guides for Measurement
Overview and Model Codes of Ball Guides for Measurement
Product details
Available design forms
|
SNS ball guide rail |
size |
|||||||||
|
20 |
25 |
30 |
35 |
45 |
||||||
|
P |
S |
P |
S |
P |
S |
P |
S |
P |
S |
|
|
u |
u |
u |
u |
u |
u |
u |
u |
u |
u |
|
u =Available design forms
IMS-I
Allowable positions for a single reference mark (7 codes, features: R1... R5)
Due to mechanical boundary conditions, the selection of reference markers should follow the following diagram. Do not select reference markers within the range of X and Y. That is to say, for R1... R5, the possible positions are determined in this way,
In order to make it>X and>Y. The position description is in steps of 1mm.
Example: Specification 20: R1=155mm, Rn=rail length -63mm, with protective tape and protective end caps (AB).
A minimum distance of 10mm must be maintained between each reference mark.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-