STT-106 Reflective Film Anti Adhesive Paper Peelability TesterReasonable layout, compact structure, strong weight and overall integrity, beautiful appearance, simple operation, and high degree of automation. As mentioned above, we believe that this product is ideal, with a low price, stable data, minimal pollution and waste, and easy operation. Due to experimental requirements, our company is required to simultaneously produce glossiness meters, wire rod coating machines, rotary viscometers, paint film adhesion testers, coating cup protrusion testers, non-destructive testing, mechanical equipment, various test molds, various screening tools, pressure testing machines, tensile testing machines, cement and concrete test molds, and other testing instruments.

STT-106 Reflective Film Anti Adhesive Paper Peelability TesterOperation steps:
Cut a 25mm × 150mm reflective film sample, place a 6600g ± 33g heavy hammer that meets the requirements of JT/T687 on it, subject the reflective film to a pressure of 17.2kPa, and then place it in a space of 70 ℃± 2 ℃ for 4 hours. Remove the reflective film and cool it to room temperature under standard testing conditions. After the experiment, the reflective film does not need to be soaked in water or other solvents, and the release paper can be easily peeled off by hand without any damage, tearing, or adhesive detachment from the reflective film.

Technical indicators:
1. Heavy hammer mass: 6600g ± 33g
2. Dimensions of heavy hammer:
a) Top of heavy hammer: length (150 ± 10) mm, width (63 ± 5) mm, height (80 ± 5) mm.
b) Bottom of heavy hammer: length (150 ± 10) mm, width (25 ± 5) mm, height (20 ± 5) mm.

Performance characteristics:
Specially designed and produced for testing the bending resistance of reflective film in production, quality supervision, engineering construction, and supervision units. It has the characteristics of reasonable structure, simple operation, wide applicability, and good measurement safety and reliability.
Meets the measurement requirements of China's national standards GB/T18833-2012 "Reflective Film for Highway Traffic Signs" and JT/T687-2007 "Test for Peelability of Reflective Film Anti Adhesive Paper".

Structural composition:
It is mainly composed of heavy hammers and other components.

Storage and Preservation:
The instrument and its accessories should be stored in a dry, clean, stable, vibration free, non corrosive, and gas free environment.

matters needing attention:
1. To ensure the accuracy of the test hammer, it should be properly stored and regularly inspected;
2. During the experiment, the heavy hammer should be handled with care to prevent slipping by hand;
3. The intellectual property rights of the product belong to our company.