design

Users can directly select the geometric shape of the tested workpiece for the detection application in the computer, and define the weld seam, probe, wedge block, and group, so as to quickly complete the preparation and setting work.

export and import

After defining the detection configuration in NDT Setup Builder, you only need to click once to export the parameters, and then import them into OmniScan MX2 and OmniScan SX flaw detectors.

detection

After importing the configuration into OmniScan MX2 and OmniScan SX flaw detectors, users can adjust the parameters and perform calibration. So far, the OmniScan MX2 and OmniScan SX flaw detectors are fully ready for testing.

Analysis and Reporting

Users can transfer detection data from the OmniScan instrument to the OmniPC software on their computer for analysis and report production. This allows the OmniScan instrument to detect another workpiece.

NDT SetupBuilder

The NDT Setup Builder design software is an essential component of Olympus' automatic and semi-automatic ultrasonic testing product line. Non destructive testing (NDT) personnel using this software can reduce the time required to define appropriate testing configurations for OmniScan flaw detectors. It can also avoid human configuration errors and ensure that the detection configuration meets the requirements of the detection specifications.

Focusing Law Calculator

Intuitive, simple, economical and practical

Three dimensional views of workpieces, wedges, and probes

Intuitive keyboard shortcuts

Import/export configuration to OmniScan MX2 and SX instruments

General interface

The interface of NDT Setup Builder software is based on two grids: probe settings and groups. The purpose of designing a grid based interface is to provide users with a quick and intuitive presentation of probe, wedge, position, and acoustic beam parameters.

There are also additional interfaces in the software for defining wedges and probes, as well as verifying parameters.

The wedge menu allows users to access various wedges in the Olympus database, as well as detailed wedge model characteristics including length, width, and height information. Through top view, side view, and end view, users can see the image of the selected wedge block.

Similarly, the probe interface allows users to access probes and their corresponding parameters in the Olympus database.
The management personnel of non-destructive testing can use the PC based NDT Setup Builder software to define the testing techniques and set the parameters of the ultrasonic beam for the testing they want to complete. Management personnel can define the technology to be used for testing remotely or on-site without the need for OmniScan instruments. More importantly, after defining the detection technology, the staff can import the configuration into the OmniScan MX2 and OmniScan SX instruments, saving the configuration time required before detection and avoiding potential human errors during configuration.

Composite scanning

A single group composite scan can provide coverage similar to two sector scans

The upgraded NDT Setup Builder software from Olympus now provides users with the ability to perform composite beam scanning. This innovative detection strategy combines a fan-shaped sound beam and a linear sound beam for detection. This type of scanning has many advantageous features, such as:

Higher detection rate

Detecting thicker materials

Higher detection speed

Shorter setup and calibration time

Faster data analysis

Tooltip

Placing the mouse pointer over certain items in the interface, such as tabs, toolbars, and dialog boxes, will display some explanations or tooltips on the screen. The tool tip contains clear images and explanations of related functions. The use of this software feature is very simple, even for inexperienced users.

2D and 3D image display

The sound ray tracking view illustrates the information of the workpiece, probe, wedge, and group in the form of two-dimensional or three-dimensional images. The display options include 2D side view, top view, and end view. The screen also displays information on the configuration control of interacting parameters and probe chips.

Not just a sound ray tracking tool

Export/Import Your Configuration and Group Instructions

All configurations supported by OmniScan and those created in NDT Setup Builder can be exported in the form of an. ondt setup file. NDT Setup Builder software can also be used as a focus rule calculator. Groups that are not supported by OmniScan can be exported as. raw files.

Export your configuration to a USB key or an SD card, and then import these configurations into the OmniScan instrument. After importing the configuration into the instrument, there is no need to perform configuration operations through the detection configuration menu. Just complete the calibration, and the instrument is fully ready for testing.

Features of NDT Setup Builder

Export configuration settings to OmniScan MX2 and SX instruments

Export rule file

Configurable acquisition unit

Support geometric shapes of flat plates, pipes, and bars

Supports PA linear, TOFD, UT, and dual matrix probes

Supports fan-shaped, linear, single beam, and composite beam

Customize weld seam template

Creation of custom probes and wedges

Report on the scanning plan

ray tracing

Top view, side view, end view, and 3D view

Sound beam formation and near-field information

Chip deactivation function

Supports true depth and half range focusing types

Metric and American units

OmniPC

OmniPC is a PC based data analysis and reporting software with the same user interface and analysis and reporting features as the OmniScan instrument.

analysis

Now with OmniPC software, OmniScan instruments can focus on scanning operations, and users can analyze the collected data on their personal computers. This software can also be used with a large screen to improve the visibility of images, and the shortcuts on the computer keyboard make operations faster.

OmniPC software has the same user interface as OmniScan software. Users do not need to learn how to use this new software to analyze OmniScan data files.

Export C-scan

OmniPC has added a new feature for corrosion applications. Users can export the complete C-scan values to a *. txt file for future analysis. These C-scan values can be displayed in Notepad, Excel, or any other software that the user wishes to perform analysis operations on.

Use any OmniScan instrument to complete the acquisition operation.

Export the data in the form of a. txt file and analyze it in the selected software.

Features of OmniPC

interface

·Same interface as OmniScan software

·Full screen mode

·Provide visual reference for A-scan (quantitative curve, TCG, reference wave amplitude, and grid)

·Volume Link View

·Pre defined weld seam coverage display

·End view with fused signal

·Combination display of multiple groups

·Equipped with zoom in/restore function

Easy to use

·Provide online assistance

·Intuitive context menu

·Shortcuts for keyboard and mouse greatly improve detection productivity

·Pre defined reading list based on common applications

·Can display 8 selectable readings simultaneously

analysis

·Direct wave (LW) synchronization

·TOFD calibration

·Adjustment and synchronization of gates (in the form of groups/sound beams)

·Export C-scan to. txt file

·Display and edit defect reports

·Built in report generation tool (customizable)

·Include images of each defect indication in the report

·Software attenuation gain