Product Description:

Heavy oilGenerator set waste heat boilerThe series is a specialized energy-saving product designed specifically for the recovery of flue gas waste heat in heavy oil power generation units. Using threaded tubes to enhance heat transfer components, threaded tubes are specially processed with threaded lines inside. When flue gas passes through them, it rotates, which enhances heat transfer and reduces the heating area of the boiler, thereby reducing its size and weight. This exhaust gas boiler has the advantages of simple structure, high thermal efficiency, long operating life, safety and reliability, and easy maintenance.

Each unitGenerator set waste heat boilerIt is composed of imported smoke boxes, exported smoke boxes, threaded pipes, return smoke chambers and their accessories.

The threaded tube waste gas heat boiler is fully welded, with the threaded tube welded to the tube plate, which is welded to the drum to form a closed chamber space. The drum is equipped with many necessary accessories for the boiler. Due to the dual return flow of flue gas inside the pipe, the inlet and outlet smoke boxes are located at the same end of the boiler, and necessary inspection holes are provided on the smoke boxes for inspection and water cleaning. The outside of the cylinder is equipped with insulation material to reduce heat loss. The insulation material is covered with galvanized steel plate to protect it from damage.

Product features:

Waste gas and heat boilers are divided into vertical waste gas boilers and horizontal waste gas boilers, both of which use natural circulation. The natural circulation boiler has a steam water separation space on its body, which provides steam to the outside

Product advantages:

For natural circulation, there must be sufficient space for steam water separation to ensure steam quality. There are usually manholes and hand holes on the cylinder body for internal inspection of the boiler. The smoke and ash on the heating surface of this type of boiler are easy to clean, and the water side is less prone to scaling due to its lower heat load. The maintenance of this type of boiler is also very convenient.

This natural circulation boiler cylinder is equipped with a water level gauge and water level control system, while the forced circulation is on the steam water separation cylinder.Generator set waste heat boilerThe main body is equipped with a safety valve, and for forced circulation, safety valves need to be installed on both the main body and the steam water separator. This type of boiler can directly take water samples from the boiler cylinder for inspection.

Threaded pipes are specially processed with threaded threads inside. When flue gas passes through, it rotates, which enhances heat transfer and reduces the heating area of the boiler, thereby reducing its size and weight. In addition, the flow of smoke inside the pipe can have single return and double return paths.

The threaded tube is the main heat exchange component in the entire flue type waste heat boiler. In order toGenerator set waste heat boilerFully recover the exhaust waste heat of the heavy oil generator unit to obtain a large steam production. The flow of flue gas in the pipe adopts a double return flow.

Overall product image: